Trade Adverts

I offer a casting service specialising in small batches and one offs, producing good quality castings in variours alloys using the lost wax process, ideal for the model engineer and restorer. Any enquiries and more details can be found on my web site. www.abbeycasting.c......
Read more...
...
STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.

We also make other…
Read more...
Call Steve Cox on 07836 736496 or email for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using flatbed Transit with rear mounted…
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the details…
Read more...
Home Workshop

Agora Latest Posts

by Peter Watkinson
Yesterday 21:22:08
by Mike Flannery
Yesterday 13:11:13
by Youra Turceninoff
19.10.2017 07:49:39
by Ashley Slater
18.10.2017 08:55:22
by Ian Guzzi
20.09.2017 18:26:24
by Richard Wilson
17.09.2017 07:39:22
Powered by jVitals
 

Advert Search



defaultAll Adsrss

We have 150 adverts and 22 completed so far in October 2017
130 For sale adverts and of these 21 have sold.
15 Wanted adverts and of these 1 found what they needed.
3 Information adverts and 2 Thank you posts.


Last approved: Friday 20th October 2017 at 11:51
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking

Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: workshop clearout

Sun 17th Sep '17

Advert ID: 30893

General
See all ads from Robert Barker
Details:
Bed Capstan Attachment 1

5 station indexing turret with 3/4” dia tooling holes

6 1/2” centre height x 4 1/2” travel

This item has been modified a few times

Over the last 15 years to suit my various

Lathes that I have owned

I think it was originally for a colchester bantam

And the last lathe it was used on was a harrison M300

Good working order , but now surplus to my requirements

Weight is approx 38 kg’s so very heavy

I would prefer collection only

This item can be inspected if required

Please contact for appointment
Terms:
Price: £75.00
Collection Only
Contact:
Robert Barker
Huddersfield
hd3
UK
07971 332245
email
workshop clearoutworkshop clearoutworkshop clearout

Wanted: Redundant Kurs 4 Gyrosphere

Sat 16th Sep '17

Advert ID: 30888

General
See all ads from Peter Watkinson
Details:
A bit of a long shot, but I know that the membership covers quite a number of disciplines.
Does anyone know where I may be able to find a redundant Kurs4 or early large type Anschutz Gyro Compass gyrosphere in the UK please?
I understand that they are obsolete now and I only want it for display, they occasionally turn up on Ebay, but almost exclusively in some distant country and the postage alone is hideous.
Many thanks,
Peter.
Contact:
Peter Watkinson
Chard
TA20
UK
01460 67320
email

For Sale: Vanco 1" Linisher - 3 Phase

Sat 16th Sep '17

Advert ID: 30887

Tools
Details:
For sale is a 3-phase 1" vertical linisher by Vanco. It is mechanically in excellent working order and can be seen tested in person or via a video I can send to interested parties. It has been stripped down, cleaned and where necessary repaired to ensure it works as required. It has a new drive belt fitted and will be supplied with one unused linisher belt to get you started.

I have used it with a single-phase inverter with variable speed control which gives you excellent flexibility in metal removal and is very smooth in operation. Note that the buyer will have to check the electrical wiring and switchgear for appropriate regulations - I do not have the equipment to do so.

The cosmetic condition is OK, certainly not perfect, but this is reflected in the price; if you want a perfect example they are typically £200 more. I am happy to arrange delivery if required at an additional cost of £25. Any questions please e-mail.
Terms:
Price: £140.00
Postage: £25.00
Collection or Post
Contact:
Chris Edge
Scottish Borders
TD3
UK
email
Vanco 1" Linisher - 3 PhaseVanco 1" Linisher - 3 PhaseVanco 1" Linisher - 3 PhaseVanco 1" Linisher - 3 Phase

For Sale: Various books

Sat 16th Sep '17

Advert ID: 30886

Books/Magazines
Details:
A selection of books for sale

1. basic electronics- a good starting point for someone who wants to learn the basics £2.50
2. newnes audio and hifi electronics engineers pocket book £3
3.newnes radio and electronic engineers pocket book £1.50
4. Electric motors and gererators- very old ex army copy , a bit tatty but fasinating £1.50
5.15th edition IEE Regulations study guide
for insatlation electrician 2.50
6. Agriculturals engineers Handbook by cb richey- full of stuff you never knew you needed to know!£10
or all for £15
postage at cost
Cheers
paul
Terms:
Price: £15.00
Collection or Post
Contact:
paul
truro
tr16
UK
email
Various booksVarious booksVarious books

For Sale: Transformer

Sat 16th Sep '17

Advert ID: 30885

Materials
Details:
RS 208 529 safety isolating transformer
Pri 0-240-415
Sec 55-0 55 / 55-0-55
Unused in original packaging
Terms:
Price: £30.00
Collection or Post
Contact:
J bagshaw
Manchester
Sk13
UK
07943809379
email

Wanted: Hydraulic automatic wood turning copy lathe

Sat 16th Sep '17

Advert ID: 30882

Tools
Details:
This maybe a shot-in-the dark, but I have been searching for the past 18 months for someone with an small automatic hydraulic wood turning copy lathe. Ideally, I am looking for someone who has a small lathe similar to a Hempel CH8, or a Hapfo 5000 that can carryout the odd contract for me. Ideally, I am wanting someone who is within easy reach of Fareham and has a lathe that is suitable for machining 32mm x 32mm x 185mm blanks in batch quantities of 300.
Alternatively, I may consider purchasing a suitable lathe which I would then supply to a local wood worker to make the parts as I have very little experience machining wood, having been in the metal machining industry all me working life.
Contact:
Dave Lewthwaite
Fareham
PO15
UK
01329-231561
email
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...

For Sale: Fobco Star Drilling Machine

Fri 15th Sep '17

Advert ID: 30881

Tools
Details:
Fobco Star 1/2" 12mm Capacity Bench Mounted Drilling Machine.

This is a good example of this very sort after machine. The table has minimal scars and there are no cracked castings. All original ball handles are present. Its a little grubby and it would benefit from a lubrication but everything works as it should.

The machine is currently fitted with a three phase motor so is perfect for retro-fitting with speed control or the motor can simply and easily be swapped for a single phase unit.

I can put it on a pallet and ship to anywhere in the UK at buyers cost.

If you have any questions please just email.
Terms:
Price: £250.00
Postage: Free
Collection or Post
Contact:
James Davy
Durham
DL14
UK
07873706598
email
Fobco Star Drilling MachineFobco Star Drilling MachineFobco Star Drilling Machine

For Sale: Part built 7.25" mj bagnal

Fri 15th Sep '17

Advert ID: 30880

Models
Details:
Selling a part built MJ Bagnal,
Full set of drawings
What i believed to be the full set of castings (castings alone brand new from mj are £1800)
Rivetted saddle tank
Smoke
Rolling chassis with brake gear
Boiler (built in 1997 by t.j. engineering ltd) pre c.e. but sadly paperwork has been lost.
Some laser cut motion work.

Being sold to help fund up and coming wedding
Terms:
Price: £2,000.00
Collection Only
Contact:
Adam
Stoke-on-trent
ST6
UK
07876287864
email

For Sale: Connexs 32A 2P+E 230V Coupler IP44 Commado Plug

Fri 15th Sep '17

Advert ID: 30878

General
See all ads from Lee Richards
Details:
These were fitted to cables but never used - slight scratches but otherwise in very good condition £5 each
All 3 for £12

Connexs 32A 2P+E 230V Coupler IP44
Part Code: CXN323P240C

Manufactured from thermoplastic - suitable for general use
Conforms to IEC 60309-1/2
Quick release feature
Fast and simple assembly and wiring, cuts time and costs
Ergonomic grip
Corrosion and impact resistant
Colour coded for fast identification of operating voltage
Safe and reliable
Typical operating temperature -25°C to 50°C
Screwless cable grip
Terms:
Price: £5.00
Delivery Only
Contact:
Lee Richards
Solihull
Bp1
UK
email
Connexs 32A 2P+E 230V Coupler IP44 Commado PlugConnexs 32A 2P+E 230V Coupler IP44 Commado Plug

For Sale: Interlas Tiger High Frequency Tig Box and a frame gantry

Fri 15th Sep '17

Advert ID: 30877

Tools
Details:
high frequanzy tig box
a bit tatty but good workng order
price includes delivery
£125
i allso have an A frame lifting gantry
can deliver local ish or if on the way somewhere as i get about
£80
Terms:
Price: £125.00
Collection or Delivery
Contact:
mel
pontefract
wf9
UK
07759918734
email
Interlas Tiger High Frequency Tig Box and  a frame gantryInterlas Tiger High Frequency Tig Box and  a frame gantry

For Sale: kemppi industrial arc welder

Fri 15th Sep '17

Advert ID: 30876

Tools
Details:
hi can deliver within 150 miles for the price these big kemppi machines are very reliable
thks mel
Terms:
Price: £250.00
Collection or Delivery
Contact:
mel
pontefract
wf9
UK
07759918734
email
kemppi industrial  arc welder

For Sale: Set of four poly wheels

Fri 15th Sep '17

Advert ID: 30873

General
See all ads from Lee Richards
Details:
These were fitted to a trolley used for sampling then exchanged for a larger size

Wheel dia 100mm
Width 35mm
Total height 130mm

Plate 80x100mm
Angled slots 8x15mm
Terms:
Price: £12.00
Postage: Free
Delivery Only
Contact:
Lee Richards
Solihull
Bp1
UK
email
Set of four poly wheelsSet of four poly wheelsSet of four poly wheels
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...

For Sale: Capstan / Turret for Colchester Bantam

Thu 14th Sep '17

Advert ID: 30870

Tools
Details:
I have a capstan unit for a Bantam. Unit is missing the clamping pieces inside the head and the pin that turns the head. both parts are an easy make and I have parts to measure on my capstan unit.I am happy to supply a drawing to the purchaser. This was a spare I will never need. Collection only or your courier as this is HEAVY!
Terms:
Price: £180.00
Collection Only
Contact:
Wayne Armstrong
Aldershot
GU11
UK
email
Capstan / Turret for Colchester Bantam

For Sale: Coarse Round Tapered Diamond Needle File

Thu 14th Sep '17

Advert ID: 30869

Tools
See all ads from Lee Richards
Details:
High quality Moleroda jewellers D151 grade needle file

160mm long
90M Cut length

Diamond is highly effective because it cuts quickly, with accuracy and removes material on both the push and pull stroke unlike standard needle files. They are however similar to standard needle files in both size and shape.

Two for sale £5 each
Terms:
Price: £5.00
Postage: Free
Delivery Only
Contact:
Lee Richards
Solihull
Bp1
UK
email
Coarse Round Tapered Diamond Needle File

For Sale: Parts Tumbler

Thu 14th Sep '17

Advert ID: 30868

Tools
Details:
Old parts tumbler.
turns and comes with some ceramic medium.
variable pulley is not working but I have never needed to change speed, so?
Surplus to requirments
collect only pls
Terms:
Price: £50.00
Collection Only
Contact:
Wayne Armstrong
Aldershot
GU11
UK
email
Parts Tumbler

For Sale: Coventry 1/2" CHS Diehead & Dies

Thu 14th Sep '17

Advert ID: 30867

Tools
Details:
I have a 1/2" CHS Diehead with M6 x 1 and M8 x 1.25 Fresh Sharpened Dies for Steel.diehead has extended shank and is in good condition.

I will post at Hermes rates £5 at your cost.

I have other dieheads also if you have a specific need pls ask.
Terms:
Price: £100.00
Postage: £5.00
Collection or Post
Contact:
Wayne Armstrong
Aldershot
GU11
UK
email
Coventry 1/2" CHS Diehead & Dies

For Sale: 3 1/2" Gauge LBSC Tich Titch Locomotive

Thu 14th Sep '17

Advert ID: 30865

Models
Details:
31/2" Gauge Live Steam Coal Fired LBSC Titch Locomotive.

This is a part built project which includes all items to finish it such as the drawings castings and fittings etc.

The quality of manufacture is exceptional. The chassis rolls beautifully with no tight spots. There is not a speck of rust on any part and nothing is damaged. All drawings are completely readable and the build/construction book is in excellent condition.

The boiler has been started.

The mechanical lubricator, regulator and safety valve are all complete as are lots of the smaller components.

The rolling chassis has been protected with primer.

A rare opportunity to own an advanced stage construction of this popular model.

If i post it to you it will be posted in a wooden box for protection.

Please email if you ave any questions or would like more pictures or to come and have a look at it.

thanks,

James
Terms:
Price: £500.00
Collection or Post
Contact:
James Davy
Bishop Auckland
DL14
UK
07873706598
email
3 1/2" Gauge LBSC Tich Titch Locomotive

For Sale: Single Phase Motor from Tom Senior S Type Head

Thu 14th Sep '17

Advert ID: 30862

General
See all ads from Pete Turton
Details:
I got this motor about 10 years ago when I purchased a Tome Senior S Type Head that had never been used. When I connected the motor it refused to start. So I put a 3 Phase motor on the head. I eventually had a look in the motor and found the centrifugal switch was jammed. Once relaesed it works perfectly. It's a single phase motor so would make a good conversion from 3 phase to single phase.

Photos show motor spec. The new switchgear is included in the sale.

Similar spec new motor would be 170GBP in VAT + Starter switch.

Due to weight looking for collection. Very close to M6 J18.
Terms:
Price: £110.00
Collection Only
Contact:
Pete Turton
Crewe
CW4
UK
01477544723
email
Single Phase Motor from Tom Senior S Type HeadSingle Phase Motor from Tom Senior S Type HeadSingle Phase Motor from Tom Senior S Type HeadSingle Phase Motor from Tom Senior S Type Head


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: 3 Phase 0.37Kw 1/2Hp Electric Motor

Thu 14th Sep '17

Advert ID: 30861

General
See all ads from Pete Turton
Details:
Bought new from Newton Tesla. Was fitted to my Tom Senior S type head. Probably less than 6 hours use.

Newt Tesla Spec
Dual Voltage 3 Phase 0.37Kw 4 Pole Drip proof Foot & Flange Mount B56 Frame 1450rpm

Current new price is approx 140GBP inc VAT

Due to weight I'm looking for collection, very close to M6 J18.
Terms:
Price: £90.00
Collection Only
Contact:
Pete Turton
Crewe
CW4
UK
07973737678
email
3 Phase 0.37Kw 1/2Hp Electric Motor3 Phase 0.37Kw 1/2Hp Electric Motor

For Sale: 3Phase 0.75Kw Electric Motor Suit Myford

Thu 14th Sep '17

Advert ID: 30860

General
See all ads from Pete Turton
Details:
I bought this motor as part of a Newton Tesla Variable Speed kit for my Myford Super 7. It never got fitted and now I have sole the lathe so it is surplus to requirements.

Spec from Newton Tesla
Dual Voltage 3 Phase 0.75Kw 1Hp 4 Pole Drip proof Resilient Base 1450rpm B56 Frame - Myford 7 replacement.

Current price is about 150GBP inc VAT

Due to weight I'm not keen to post so looking for collection. Very close to M6 J18.
Terms:
Price: £95.00
Collection Only
Contact:
Pete Turton
Crewe
CW4
UK
07973737678
email
3Phase 0.75Kw Electric Motor  Suit Myford3Phase 0.75Kw Electric Motor  Suit Myford3Phase 0.75Kw Electric Motor  Suit Myford

For Sale: 330mm Long 10mm Silver Steel x3

Thu 14th Sep '17

Advert ID: 30859

Materials
See all ads from Lee Richards
Details:
Clearing remianing stock

Three lengths of 330mm Long 10mm Silver Steel
Terms:
Price: £8.00
Postage: Free
Delivery Only
Contact:
Lee Richards
Solihull
Bp1
UK
email

For Sale: WNT 8mm Tungsten Carbide Centre Drills

Thu 14th Sep '17

Advert ID: 30858

Tools
See all ads from Lee Richards
Details:
Clearing out all my remaining stock

Four left WNT 8mm Tungsten Carbide Centre Drills £5 each
Terms:
Price: £5.00
Postage: Free
Delivery Only
Contact:
Lee Richards
Solihull
Bp1
UK
email
WNT 8mm Tungsten Carbide Centre Drills

For Sale: Warco 918 Bench Top Metal Lathe

Wed 13th Sep '17

Advert ID: 30856

Tools
Details:
Warco 918 Bench Top Metal Lathe

3 and 4 Jaw Chuck , Drill Chuck , Face Plate , Lathe Tools , Fixed Steady , Travelling Steady , Screwcutting Gearbox ,
Thread Dial Indicator , Imperial Dials ,
240 Volt Supply Motor Fitted

Can be Secured On a Pallet For Delivery To your Door at Cost

http://www.bedetools.com
Terms:
Price: £495.00
Collection or Delivery
Contact:
Trader
Bede Tools and Machinery
Newcastle Upon Tyne
UK
01914286575 - 07966285390
email
Warco 918 Bench Top Metal LatheWarco 918 Bench Top Metal LatheWarco 918 Bench Top Metal LatheWarco 918 Bench Top Metal Lathe

For Sale: Rear toolpost for Myford lathe

Wed 13th Sep '17

Advert ID: 30855

Tools
Details:
Rear toolpost for Myford ML7, Super 7, etc. Complete with HSS parting blade. Unused.

Price includes postage to UK
Terms:
Price: £25.00
Postage: Free
Post Only
Contact:
Nick Baines
Oxford
OX5
UK
email
Rear toolpost for Myford latheRear toolpost for Myford lathe
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Clarkson-type chuck and collets

Wed 13th Sep '17

Advert ID: 30854

Tools
Details:
Clarkson-type chuck and collets for screw end milling cutters. Chuck has MT2 shank. By Vertex, in wooden box, with eight collets:

6, 10, 12, 16 mm
1/4, 3/8, 1/2, 5/8 in.

Price includes postage to UK
Terms:
Price: £40.00
Postage: Free
Post Only
Contact:
Nick Baines
Oxford
OX5
UK
email
Clarkson-type chuck and colletsClarkson-type chuck and collets

For Sale: Hadley No2 Flypress

Tue 12th Sep '17

Advert ID: 30853

Tools
Details:
Hadley No 2 Fly Press. Excellent working order having had very little use. Ball missing from arm but the 3 jaw chuck that's fitted works very well!
'V' bending blade (top & bottom) included. Needs bolting down (holes provided) as HEAVY, collection only.
Terms:
Price: £100.00
Collection Only
Contact:
Alan Worland
Benfleet
SS7
UK
01268759741

For Sale: Hardinge HLVH & HLV metric gear set

Tue 12th Sep '17

Advert ID: 30852

Tools
Details:
Hardinge Metric conversion set to suit Imperial Hardinge HLV or HLVH lathe.
sizes are 45, 46, 50 x 2, 55 x 3, 57, 58, 74 and 127 teeth. Comes with the correct quadrant. Collection preferred, or can be posted at cost to the buyer.
Terms:
Price: £200.00
Collection Only
Contact:
Trader
Malcolm Bason
Witney, Oxfordshire
OX29
UK
01993 882102
Hardinge HLVH & HLV metric gear set

For Sale: Myford ML10 lathe with tooling.

Tue 12th Sep '17

Advert ID: 30849

Tools
Details:
Myford ML10 lathe on drip tray. Includes 3 jaw chuck, with both sets of jaws, 4 jaw chuck, quick change tool post with 2 stardard tool holders and one parting blade tool holder. Also a selection of change wheels, faceplate, drill chuck, running & fixed centres, range of changeable tip turning tools, grease guns and manuals. Single phase, push button starter. In nice tidy, lightly/little used condition. (orange trolley in pics NOT included)
Terms:
Price: £795.00
Collection Only
Contact:
Trader
Malcolm Bason
Witney, Oxfordshire
OX29
UK
01993 882102
Myford ML10 lathe with tooling.Myford ML10 lathe with tooling.Myford ML10 lathe with tooling.Myford ML10 lathe with tooling.

For Sale: Romulus boiler plus project

Mon 11th Sep '17

Advert ID: 30847

Models
Details:
A brand new, unused, steel boiler for the 7 1/4in. gauge Romulus design. The boiler was built by Bell Boilers and includes full CE documentation as delivered.

Also available for an additional £200, is an early stage Romulus project- erected chassis, cylinder set machined from Meehanite, wheels machined from EN8. Axle material and sealed bearing axleboxes.

Buyer to collect please.

Photos sent on request.

Thank you.
Terms:
Price: £2,000.00
Collection Only
Contact:
Suna Page
Swnindon
SN10
UK
email

For Sale: Analog multimeter

Mon 11th Sep '17

Advert ID: 30846

Tools
Details:
Goerz unigor 3n multimeter in perfect working order as new in origiunal case
Terms:
Price: £45.00
Collection or Post
Contact:
J bagshaw
Manchester
Sk13
UK
07943809379
email
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...

For Sale: Old Books

Mon 11th Sep '17

Advert ID: 30844

Books/Magazines
Details:
I have the following books which due to lack of space I need to find new homes for. Collection welcome or will post at your cost.
Caxton Engineering Workshop Practice Vols 1 and 2 -both vgc
A W Judge - High Speed diesel Engines - 2nd Edition 1935 - cover a bit scruffy
Duncan - Steam and Other Engines - 1932 reprint - gc
George Sturt -The Wheelwright's Shop - as new
A W Judge - The Modern Motor Engineer Vols 1 and 2 - scruffy covers
A W Judge - The Modern Motor Engineer Vols 1, 2 and 3 - gc
A W Judge - Modern Motor Cars Vols 1 and 3 - scruffy.
All are £1 per book.
Terms:
Price: £1.00
Collection or Post
Contact:
Mike
Chelmsford
CM13
UK
email

For Sale: Jones and Shipman Pilkington Glass Surface Plate

Mon 11th Sep '17

Advert ID: 30841

Tools
Details:
Boxed Jones and Shipman Pilkington Glass Surface Plate in good condition, but does have a few very minor and shallow scratches. Six by Eight inches - about one inch thick.

Heavy item, economy postage at cost.
Terms:
Price: £25.00
Postage: £5.99
Collection or Post
Contact:
David
Reading
UK
email
Jones and Shipman Pilkington Glass Surface PlateJones and Shipman Pilkington Glass Surface Plate

For Sale: myford super 7 clutvh assembly mk 2

Mon 11th Sep '17

Advert ID: 30840

Tools
See all ads from Steve Hall
Details:
complete clutch assembly in great condition
i can email photos on request
Terms:
Price: £150.00
Collection or Delivery
Contact:
Steve Hall
wolverhampton
wv12
UK
01922445739
email

For Sale: As New Astra / Vertex Dividing Head

Mon 11th Sep '17

Advert ID: 30838

Tools
Details:
Nearly new Astra branded, but probably Vertex made dividing head. The pictures shows the condition. There is a small amount of staining from the preservative coating most of which I've recently removed. The dark brown patches are preservative which still needs to be removed. I couldn't find any swarf on the head, so my guess is it's new or certainly has had very little use.

Due to weight I'd prefer collection, but I can arrange postage at cost price if you contact me.

Price: £165 or nearest offer
Terms:
Price: £165.00
Collection or Post
Contact:
David
Reading
RG6
UK
email
As New Astra / Vertex Dividing HeadAs New Astra / Vertex Dividing HeadAs New Astra / Vertex Dividing HeadAs New Astra / Vertex Dividing Head


Disclaimer

Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.

By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.

We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.

In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.

We do not sell, hire, share or give out your email address.

The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.

So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new  and repeat visitors. It does not have any detail on who you are.

Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.

All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.

This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales. 

 

Donate

Want to help us fund the site and time spent by the people behind it then use the button below.

We are not a registered charity so you can't claim it back but it helps pay for the costs of improving the features.

You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.