Trade Adverts

I offer a casting service specialising in small batches and one offs, producing good quality castings in variours alloys using the lost wax process, ideal for the model engineer and restorer. Any enquiries and more details can be found on my web site. www.abbeycasting.c......
Read more...
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs…
Read more...
...
STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.

We also make other…
Read more...
Call Steve Cox on 07836 736496 or email for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using flatbed Transit with rear mounted…
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the details…
Read more...
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details. ...
Read more...
Home Workshop

Agora Latest Posts

by Leo Byrne
Today 08:50:54
by Leo Byrne
17.03.2017 21:30:50
by Victor Scott
14.03.2017 13:54:26
by Bob Worsley
05.03.2017 09:47:17
by Glen Casson
12.02.2017 04:58:52
by Bill Todd
10.02.2017 00:16:46
Powered by jVitals
 

Advert Search



defaultAll Adsrss

We have 211 adverts and 30 completed so far in March 2017
160 For sale adverts and of these 30 have sold.
44 Wanted adverts and of these none found what they needed.
5 Information adverts and 2 Thank you posts.


Last approved: Friday 24th March 2017 at 11:09
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking

Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

Wanted: crucible furnace

Wed 15th Mar '17

Advert ID: 29279

Tools
Details:
Has anyone got a flamefast or similar gas fired crucible furnace working or not.
Thanks for looking. Graham
Contact:
Graham Gardner
Gloucester
GL53
UK
01242 580548 + 07870900332
email

For Sale: Wobblers

Wed 15th Mar '17

Advert ID: 29277

Tools
See all ads from Nick Tampsett
Details:
I have 3 off wobblers edge finders.
£3.00 each.
Plus P&P
Email for photo.
Terms:
Price: £3.00
Postage: Free
Collection or Post
Contact:
Nick Tampsett
Tunbridge Wells
Tn24
UK
email

For Sale: Jacobs Chuck

Wed 15th Mar '17

Advert ID: 29276

Tools
See all ads from Nick Tampsett
Details:
Jacobs chuck no 3A. 1/8 -5/8 capacity.
Good condition. No key.
Email for photo.
Terms:
Price: £10.00
Postage: £3.00
Collection or Post
Contact:
Nick Tampsett
Tunbridge Wells
Tn24
UK
email

For Sale: DTI and clocking arm

Wed 15th Mar '17

Advert ID: 29272

Tools
See all ads from Nick Tampsett
Details:
Mitutoyo DTI with clocking arm.
Excellent condition.
Email for photo.
Terms:
Price: £30.00
Postage: £3.00
Collection or Post
Contact:
Nick Tampsett
Tunbridge Wells
Tn24
UK
email

Wanted: speedy boiler

Wed 15th Mar '17

Advert ID: 29271

Models
Details:
has anyone have a 5 inch speedy boiler for sale if so please email with details
Contact:
dave richardson
derby
de21
UK
email

For Sale: Burnerd chuck

Wed 15th Mar '17

Advert ID: 29270

Tools
See all ads from John Turner
Details:
A 5 inch Burnerd 3 jaw self centering chuck in reasonable condition, no back plate or outside jaws. £45 sensible offers considered. also vertex R8 milling chuck metric and imperial £30 or offers Collection prefered but may post.
Terms:
Price: £45.00
Collection Only
Contact:
John Turner
Uttoxeter
st14
UK
07870997164
email
Burnerd chuckBurnerd chuck
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Bosch UNEO 14.4v drill, sds hammer drill and screwdriver

Wed 15th Mar '17

Advert ID: 29269

Tools
Details:
I'm overstocked with drills, sds drills and screwdriver drills so I'm selling my Bosch UNEO 14.4v which covers the above functions. It has a hexagon chuck which takes hexagon screw and drill bits (not the short ones) the Bosch SDS drill bits and comes with charger and a 10mm keyless chuck with the hexagon shank. It has a Li-ion battery built in to the body with an indicator light which shows the charge left in the battery and can be left for a long while without losing the charge as a ni-cad battery would. It's only been used half a dozen times from new and comes in it's original case. Included are an 8mm sds drill and 9 drill bits ranging from 3.2mm to 6.5mm which are all unused.
I would like £45 collected + £6 for courier delivery
Terms:
Price: £45.00
Postage: £6.00
Collection or Delivery
Contact:
Derek Newman
Clacton on sea
CO16
UK
01255830411
email
Bosch UNEO 14.4v drill, sds hammer drill and screwdriverBosch UNEO 14.4v drill, sds hammer drill and screwdriver

For Sale: Tubela Hydraulic Pipe Bender

Wed 15th Mar '17

Advert ID: 29268

Tools
See all ads from Stephen Ward
Details:
Hydraulic handheld pipe bender made by Tubela and with formers in a ridged case.

This is a well-known brand and used predominantly used within the HVAC sector. Can post at cost or cash on collection. May also consider swop for CP or Ingersoll Rand Air Tools.
Terms:
Price: £155.00
Collection or Post
Contact:
Stephen Ward
Camberley
GU15
UK
01276677666
email
Tubela Hydraulic Pipe Bender

For Sale: Hydraulic Bike Jack

Wed 15th Mar '17

Advert ID: 29267

Tools
See all ads from Stephen Ward
Details:
Hydraulic Bike Jack made in Germany and with Cast Iron wheels not nylon. Max SWL 400KG.

This is very heavy and would need to be collected. Cash on collection please. £65.00
Terms:
Price: £65.00
Collection Only
Contact:
Stephen Ward
Camberley
GU15
UK
01276677666
email

For Sale: Jones and Shipman 540 Surface Grinder

Wed 15th Mar '17

Advert ID: 29266

Tools
Details:
JONES and SHIPMAN 540 Surface Grinder

18” x 6” Magnetic Table Fitted ,
Nice Clean and Tidy Machine
3 Phase Supply
P.O.A

http://www.bedetools.com
Terms:
Price: Multiple
Collection or Delivery
Contact:
Trader
Bede Tools and Machinery
Newcastle Upon Tyne
UK
01914286575
email
Jones and Shipman 540 Surface GrinderJones and Shipman 540 Surface GrinderJones and Shipman 540 Surface Grinder

For Sale: Harrison M300 Capstan Attachment

Wed 15th Mar '17

Advert ID: 29265

Tools
Details:
ACROVU Ltd Capstan Attachment To Fit HARRISON M300 Metal Lathe
( The Attachment is Unused )
The Tool Block requires Drilling to Take Your Size Tooling
P.O.A


VERTEX Precision End Mill Grinder
Comes with : Assorted Collets , Diamond Grinding Wheels ,
Grind Hold Unit x 2 - ( Square Type for 2 and 4 Flute )(Hex Type for 3 Flutes )
Unit is in as New Condition !!
240 Volt Supply
P.O.A

More Pictures at : http://www.bedetools.com
Terms:
Price: Multiple
Collection or Delivery
Contact:
Trader
Bede Tools and Machinery
Newcastle Upon Tyne
UK
01914286575
email
Harrison M300 Capstan AttachmentHarrison M300 Capstan AttachmentHarrison M300 Capstan AttachmentHarrison M300 Capstan Attachment

Wanted: Myford Nose Collets

Tue 14th Mar '17

Advert ID: 29264

Tools
Details:
Another long shot.

I would like to obtain both 13/64" and 31/64" sizes in the Myford 2MT nose collets to complete my set if anyone happens to have spares of these please.

Also still looking for 5mm and 8mm BCA jig borer collets.

Thanks
Phil
Contact:
Phil Procter
Silsden
UK
email
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: Clarke 500Kg Hydraulic Lift Table

Tue 14th Mar '17

Advert ID: 29262

Tools
Details:
Clarke 500Kg Hydraulic Lift Table.

Used in excellent condition.

Has some scratches to top but otherwise excellent with no damage, rust or signs of abuse. All works correctly.

Table dimensions: 850 x 500mm.

Max height: 900mm.

Can put on a pallet and have delivered to anywhere in UK at buyers expense.

Thanks,

James (01388608132)
Terms:
Price: £275.00
Collection or Post
Contact:
James
Bishop Auckland
DL14
UK
email
Clarke 500Kg Hydraulic Lift TableClarke 500Kg Hydraulic Lift Table

Wanted: Ainjest for Bantam

Tue 14th Mar '17

Advert ID: 29260

Tools
Details:
I think it may be a long shot, but does anyone have an Ainjest screw cutting attachment for a Colchester Bantam that they would like to part with?
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email

For Sale: CNC controller

Tue 14th Mar '17

Advert ID: 29257

CNC
Details:
I have a DIYCNC System 4 4 axis cnc controller,90% assembled, and comes with a spare stepper driver and relay boards plus all items to finish the project.£250.Stepper motors available as an extra purchase.Prefer collection.
Terms:
Price: £250.00
Collection Only
Contact:
Mike Webb
Cirencester
GL7
UK
email

Wanted: Walter UTA100 Universal Dividing Head & Tailstock

Mon 13th Mar '17

Advert ID: 29256

Tools
Details:
Hi folk

Looking for a Walter UTA100 (100mm/4") Universal Dividing Head and matching Tailstock, ideally with chuck too.

Must be in good condition.

Will tavel for the right one, good money awaits ;-)

Thanks in anticipation
Contact:
George
Lowestoft
NR33
UK
email

For Sale: Bernerd 4-Jaw Chuck and Key

Mon 13th Mar '17

Advert ID: 29255

Tools
Details:
A quality Chuck in good condition. Believe the fitting is for a Myford (1-1/8th by 12tpi). Looks well kept and not abused.
Terms:
Price: £48.00
Postage: £10.00
Collection or Post
Contact:
Richard Bartholomew
Thetford
IP27
UK
01842819969
email
Bernerd 4-Jaw Chuck and KeyBernerd 4-Jaw Chuck and KeyBernerd 4-Jaw Chuck and KeyBernerd 4-Jaw Chuck and Key

Wanted: M40 Ring Gauge

Mon 13th Mar '17

Advert ID: 29254

Tools
Details:
Bit of a long shot but does anyone have a M40 x 1.0 go ring gauge. I need one for a one off job so cant justify the cost of a new one from the tooling suppliers
Contact:
Richard Marsh
Burnham on Crouch
CM0
UK
email
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

Wanted: Thornton clock pinion cutters

Mon 13th Mar '17

Advert ID: 29249

Tools
Details:
Does anyone have (and is willing to sell) any of the following Thornton pinion cutters:
1.0 Module 6, 8 & 15 tooth.
0.9 Module 6 & 8 tooth
Urgently needed to complete a project.
Any sensible price paid!
Contact:
Richard Stuart
Corsham
SN13
UK
07917335700
email

For Sale: magnetic base and d.t.i.

Sun 12th Mar '17

Advert ID: 29248

Tools
Details:
Mercer type 117 C .on --off button and 6"post.
variable positioning adjustable arm, with a Draper
dial with .001 to .500 travel .in used condition
and positive feel to the clock ..in good working
condition.

£30.00 inc post .

phone 01255 433583 leave a message and I will get back to you,,Gerry
Terms:
Price: £30.00
Postage: Free
Collection Only
Contact:
gerry
colchester
c015
UK
01255 433583
magnetic base and d.t.i.magnetic base and d.t.i.magnetic base and d.t.i.

Information: Can anyone ID this chuck?

Sun 12th Mar '17

Advert ID: 29245

Tools
Details:
Hi there.

I was given this old girl and am refurbishing it to use on my Myford.

I'd like some help, please, to ID it as have never seen one with a key hole the same.

Thanks very much.

Nicholas
Contact:
Nicholas Key
UK
email
Can anyone ID this chuck?Can anyone ID this chuck?

For Sale: Triple expansion marine engine

Sun 12th Mar '17

Advert ID: 29244

Models
Details:
An interesting and superbly engineered working model of a triple expansion marine engine complete with Hawkworth reversing valve gear.
It comes complete with full scale engineering drawings and valve timing graphs etc.

Cylinder bores... 3/4", 11/4", 13/4" height approx. 6" plus base.

This was built by a senior Aircraft design and development engineer to a high standard and includes a history folder detailing his working life from Vickers Aviation to deHavilland with the aircraft worked on and some period photographs of the same.

I would prefer collection for this, but would be willing to discuss alternatives with purchaser.

Price £2400 or very close offer.
Terms:
Price: £2,400.00
Postage: £35.00
Collection, Delivery or Post
Contact:
Nigel
Exeter
EX10
UK
01395514529
Triple expansion marine engineTriple expansion marine engineTriple expansion marine engineTriple expansion marine engine

Wanted: Colchester Master

Sun 12th Mar '17

Advert ID: 29243

Tools
See all ads from Piero Franchi
Details:
Please help with my search for a Colchester Master Lathe

Might you have, or do you know anyone with a VERY good conditioned lathe.

I am willing to pay a good price for the right lathe

distance no object

please email me, text or call
Contact:
Piero Franchi
St Albans
AL2
UK
07961303471
email

Wanted: Dore Westbury MK2 plans, castings etc.

Sun 12th Mar '17

Advert ID: 29241

Tools
See all ads from Nick Prionas
Details:
Hi all.
I'm trying to restore my lovely new miller, a Dore Westbury Mark2.

So, I'm looking for MK2 plans and/ or any relevant literature, magazine articles etc.
Also castings or spare parts, are more than welcome.

Thanks
Nick
Contact:
Nick Prionas
Athens
1213
Greece
0030 6942660083
email
Dore Westbury MK2 plans, castings etc.
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: Bridgeport right angle drive

Sat 11th Mar '17

Advert ID: 29240

Tools
Details:
Not much more to say. Bridgeport mill right angle drive in good condition. R8 fitting. Price ono
Terms:
Price: £175.00
Collection, Delivery or Post
Contact:
Sandy
Stockport
SK8
UK
email
Bridgeport right angle driveBridgeport right angle driveBridgeport right angle driveBridgeport right angle drive

For Sale: D1-3 Faceplate

Sat 11th Mar '17

Advert ID: 29239

Tools
Details:
This is a 12" faceplate with a D1-3 fitting. In very good condition. Price ono
Terms:
Price: £75.00
Collection, Delivery or Post
Contact:
Sandy
Stockport
SK8
UK
email
D1-3 FaceplateD1-3 FaceplateD1-3 Faceplate

For Sale: D1-3 4-Jaw chuck

Sat 11th Mar '17

Advert ID: 29238

Tools
Details:
This is an 8" Burnerd 4-Jaw chuck with a D1-3 fitting. It's the thin bodied one so suitable for lighter lathes. In very good condition.Price ono
Terms:
Price: £175.00
Collection, Delivery or Post
Contact:
Sandy
Stockport
SK8
UK
email
D1-3 4-Jaw chuckD1-3 4-Jaw chuckD1-3 4-Jaw chuck

For Sale: Boxford collet set

Sat 11th Mar '17

Advert ID: 29237

Tools
Details:
Some more of Ken's stuff.
This is a Boxford collet set with nose piece, collet holder and drawbar with a set of imperial and metric collets in a fitted wooden case.
27 collets in total
1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2" and 2, 3, 4, 5, 6, 7, 8, 9 (2 off), 10, 11, 12mm. Buy yourself a 1mm and you have a complete imperial and metric set.These collets are usually about £12 each so asking £275 ono for the set.
Terms:
Price: £275.00
Collection, Delivery or Post
Contact:
Sandy
Stockport
SK8
UK
email
Boxford collet setBoxford collet set

For Sale: Myford Super 7 with screwcutting gearbox

Sat 11th Mar '17

Advert ID: 29236

Tools
Details:
Myford Super 7 with imperial screw cutting gearbox mounted on Myford cabinet. Complete with 3 jaw self centring chuck, 4 jaw chuck, tailstock drill chuck, faceplate with drive dog, rear tool post for parting, and tilt and swivel vertical slide. The lathe bed is in good condition, the vertical slide has sustained damage to one of the T slots as shown in the photo.

It is fitted with a 3 phase motor but will be supplied with an inverter drive for running it from single phase power.

Located near Cheltenham, collection preferred but may be able to deliver, please ask.
Terms:
Price: £1,450.00
Collection or Delivery
Contact:
Will Garrett
Cheltenham
GL52
UK
07500948945
email
Myford Super 7 with screwcutting gearboxMyford Super 7 with screwcutting gearboxMyford Super 7 with screwcutting gearboxMyford Super 7 with screwcutting gearbox

Information: Boxford VM30 milling machine

Sat 11th Mar '17

Advert ID: 29235

Tools
Details:
Can anyone give me the dimensions of this type of mill (especially height} to enable me to establish if and can get it into my workshop.
I would like this info before I start the search for a machine

Regards Dave G
Contact:
Dave Grayson
UK
email
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: cast ali bed

Sat 11th Mar '17

Advert ID: 29233

Materials
Details:
cast ali bed came from a very large proof printer,, d ,mirror,size 55 long,4,3/8 high,6,1/2 wide leg part 16 wide,,never got round to cutting it up for casting,which wont happen now ,no bandsaw,just in case found another use,to good to scrap .collection only chingford e4
Terms:
Price: £20.00
Collection Only
Contact:
joannis
chingford
e4
Christmas Island
email
cast ali bedcast ali bed

For Sale: old war office bisley 3 draw cabinet

Sat 11th Mar '17

Advert ID: 29231

General
Details:
old 3 draw bisley cabinet,very ridged,
though bottom draw a bit rickedy,had it loaded with electric motors,so takes some weight,40 high 25 deep 18,1/2 inch wide.
collection only from chingford e4.
the ten pound is what it cost for me to get there,,there is also two wooden cabinets made from block board wery strong one with two compartment two shelves other with three compartments, groves to take draw units,,no draws,no tops, just use 1/4 ply ,,ideal material storage,
sizes approx 30h,36,wide 22 deep,,10 pound each
Terms:
Price: £10.00
Collection Only
Contact:
joannis
chingford
e4
Christmas Island
email
old war office bisley 3 draw cabinetold war office bisley 3 draw cabinetold war office bisley 3 draw cabinetold war office bisley 3 draw cabinet

Wanted: Electric Muffle Furnace

Sat 11th Mar '17

Advert ID: 29230

Tools
Details:
I would like to buy a small bench top electric muffle furnace to harden and temper small leaf springs about 5 inches long. Nothing fancy and it doesn't have to look pretty . Please email me if you have anything suitable.
Contact:
Mike Pavie
Bideford
ex39
UK
email

Wanted: Clock gear cutters

Fri 10th Mar '17

Advert ID: 29229

Tools
Details:
Does any one have any of the following that they are prepared to sell 0.9 module wheel cutter, 0,9 module 10 tooth cutter 0,75 module 6 tooth cutter and 0.75 module wheel cutter . I know they are like hens teeth and expensive to buy new but if anyone does want to sell any I will pay a good price, Thanks
Contact:
Mike Smith
Leominster
HR6
UK
07921254225
email

Wanted: Synchronome Slave Clock

Fri 10th Mar '17

Advert ID: 29228

General
Details:
Hi,

I'm looking for a slave clock for my Synchronome master clock.

I would consider any 30 sec impulse slave.

Thanks for looking.

Phil.
Contact:
Phil Fern
Stockport, Cheshire
SK6
UK
email

Wanted: Titfield Thunderbolt Castings (3 1/2")

Fri 10th Mar '17

Advert ID: 29227

Models
Details:
Hi,

Has anyone got any 31/2" Titfield Thunderbolt castings lying about that they're never likely to use?

Thanks for looking.

Phil.
Contact:
Phil Fern
Stockport, Cheshire
SK6
UK
email
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

Wanted: 7 1/4 LNER slide bar castings.

Fri 10th Mar '17

Advert ID: 29226

Materials
Details:
Wantèd, anyone got a pair of BR. LNER slide bar castings, phosphor bronze or steel.
Contact:
Adrian
Hull
UK
07917886260
email

For Sale: Gauge plate/GFS

Fri 10th Mar '17

Advert ID: 29224

Materials
Details:
Oil hardening ground flat stock or High carbon steel or gauge plate all the same thing, offcuts with slight surface rust, handy for expansion links, form tools or whatever needs to be hard and sharp when finished. 4 sizes 6mm thick plates, 10 x 25 x 75mm long, only 6 available, 1” x 1/8” x 4” long, 5/8” x 5/16” x 2 ¾” long. £1 each for small plates, £2 for the large ones, all the sections 3 pieces for a pound, mix and match if you want.
Post and packing pro rata. This is the last available.
Terms:
Price: Multiple
Collection or Post
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email
Gauge plate/GFS

For Sale: Fairchild 8MM projector

Fri 10th Mar '17

Advert ID: 29222

General
Details:
This is a bit of an oddball, it is a Fairchild 8mm projector that we used to use to show movies of our machinery before video tapes were invented. The movies are in a special cassette in a loop, so the movie keeps playing continuously. It looks like a TV when open for viewing and closes down into a case for transport. It was working when it was replaced by a TV and video. It seems a shame to dump it, any interest or offers? I do have pictures but too big for this site but will email on request.
Terms:
Price: £50.00
Collection or Delivery
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email

For Sale: Foster cylinder block

Fri 10th Mar '17

Advert ID: 29221

Materials
Details:
4" scale Foster cylinder block
£70 incl shipping by courier to UK mainland.
Terms:
Price: £70.00
Collection or Delivery
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email
Foster cylinder blockFoster cylinder blockFoster cylinder block

For Sale: Handwheels

Fri 10th Mar '17

Advert ID: 29220

Materials
Details:
Cast iron handwheel 61/4" od

Cast aluminium handwheel 51/2" od

Cast iron chromed handwheel 4" od

Total for all three items as photo £6 plus £4 p&p
Terms:
Price: £6.00
Postage: £4.00
Collection or Post
Contact:
R Dacey
Peterborough
PE7
UK
01733 245317
Handwheels

For Sale: 1/2" pitch chain

Fri 10th Mar '17

Advert ID: 29219

General
Details:
Genuine Renolds Coventry chain, new old stock, simple, ½” pitch x 3/16” between side plates, OK for vintage bikes 25 ft coils still boxed. £15. Delivery by next day courier £10
Terms:
Price: £15.00
Postage: £10.00
Collection or Delivery
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Miscellaneous items

Fri 10th Mar '17

Advert ID: 29218

Tools
Details:
More oddments to go
No 4 morse sleeve to number 1 £2
No 5 morse to number 4 £1 each
Jacobs No 34 chuck on No 4 morse shank, £8
Armstrong USA Ace toolholders for ¼” sq bits £3 each
J&S monster tool holder for 3/8” bits £3
Jacobs No 3 chuck on rough no 2 morse shank £5
Mostly Eclipse tool bits, maybe a bit on the large size, all but one ¾” Square, one 7/8” square.
5” long pieces £5 each, shorter pieces £3 each, £25 the lot.
Post or next day courier extra at cost.
Terms:
Price: Multiple
Collection or Post
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email
Miscellaneous itemsMiscellaneous items

For Sale: 40 Int collet chuck

Fri 10th Mar '17

Advert ID: 29217

Tools
Details:
Not sure what make this is, it has a 1/4" collet with it. Now free!!! just pay the postage.
Terms:
Price: Free
Postage: £10.00
Collection or Delivery
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email
40 Int collet chuck

For Sale: Clarkson collet chuck, 40 int

Fri 10th Mar '17

Advert ID: 29216

Tools
Details:
Clarkson small collet chuck for up to 5/8"/16mm shank cutters. 40 int taper, no collets useable but centre damaged, I am told they can be replaced, Now free!! just pay the postage
Terms:
Price: Free
Postage: £10.00
Delivery Only
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email
Clarkson collet chuck, 40 int

For Sale: Clarkson Autolock chuck, 40 int

Fri 10th Mar '17

Advert ID: 29215

Tools
Details:
Clarkson Autolock chuck, large size with a 1” collet and 40 int taper. Good centre and includes a small adaptor which converts the chuck to the small size for cutters with shanks up to 16mm or 5/8" No small collets included but easily available. I am having a massive clear out so now free!!!. Just pay the Postage.
Terms:
Price: Free
Postage: £10.00
Collection or Delivery
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email
Clarkson Autolock chuck, 40 int

For Sale: Cast Tich wheels

Fri 10th Mar '17

Advert ID: 29213

Materials
Details:
Cast Tich wheels, not machined, £10 for 4, plus post at cost.
Terms:
Price: £10.00
Postage: £5.00
Collection or Post
Contact:
Chris Gunn
Kettering
NN15
UK
07785 393533
email

Wanted: Clarkson Air bearing Flute-Grinding Manual

Fri 10th Mar '17

Advert ID: 29210

Books/Magazines
Details:
I am after a copy of the Clarkson Air bearing Flute-Grinding attachment instruction Manual.

It is only for interest, so a scanned emailed copy, or a photocopy would be fine - any costs reimbursed.

Thank you.
Contact:
James Burden
Southend
SS5
UK
email
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: Carbide Inserts. Parmet, Korloy, Iscar, Secolor

Fri 10th Mar '17

Advert ID: 29208

Tools
Details:
More from Jims Workshop


£2 each. £0.96 postage.




Carbide inserts


6 x VBMT 160404E UR Pramet

2 x SPKN 1203EDSR Korloy

4 x SPKN 1203EDSR Korloy

2 x GTN-3W Iscar

5 x TNMG 160404 MMN APT

9 x TPKN 1603 PDSR Korloy

6 x DNMG 150604-MF2 Secolor

2 x DNMG 150608-M3 Secolor

4 x VBMT 160408-F2 Secolor

3 x VBMT 160412-F2 Secolor

2 x DNMG 150603-I5 Secolor

9 x TPMR 110304E-46 Parmet

10 x KNUX 160405 L11 Vandurit

10 x KNUX 160405 L11 Vandurit
Terms:
Price: £2.00
Postage: £0.96
Collection, Delivery or Post
Contact:
Wilson Logan
Paisley
PA1
UK
07711 026653
email
Carbide Inserts. Parmet, Korloy, Iscar, SecolorCarbide Inserts. Parmet, Korloy, Iscar, SecolorCarbide Inserts. Parmet, Korloy, Iscar, SecolorCarbide Inserts. Parmet, Korloy, Iscar, Secolor

For Sale: BSW & BSF Hex Dies, LAL, Warrior, Presto, etc

Fri 10th Mar '17

Advert ID: 29205

Tools
Details:
More stuff from Jims Workshop


£5 each.

Postage £0.96 to £3.30 depending on qty.

In all cases post charged at cost.



BSW Hex Dies

3/16

1/4

5/16

3/8

7/16

1/2

9/16

5/8

7/8

3/4

1"

1" 1/4

1" 3/8



BSF Hex Dies


5/16

3/8

7/16

9/16

5/8

3/4
Terms:
Price: £5.00
Postage: £0.96
Collection, Delivery or Post
Contact:
Wilson Logan
Paisley
PA1
UK
07711 026653
email
BSW & BSF Hex Dies, LAL, Warrior, Presto, etc

For Sale: Some interesting books for you!

Thu 9th Mar '17

Advert ID: 29201

Books/Magazines
Details:
All in good to near mint condtion: condition:
1. Scale Model Traction Engine Building -
" The Minnie". By LC Mason (1971 - 198 pages of details construction drawings and building instructions by an expert.)Prices start on Amazon at £45: Just £25 here.
2. 'The Steam launch', by Richard M Mitchell, 339 well illustrated pages. Again on Amazon at £23 for average copies Here - £15
Postage and Packing together would still be just £3.
(Several Land and water Speed record books also available- please call evenings: 01842-819969)
3. 'General Engineering Workshop Practice', 557 pages in good condition, with slightly faded Hard Covers . No dates but mentions 'Turning Bases for Anti-Aircraft Shells!!, So presume issued in WW2. - £4
4. 'The Practical Carpenter and Joiner Illustrated' Odhams, 448 pages, no date, but would guess 1950's. Unmarked inside, but faded Hard Covers - £2
Postage as appropriate to volume, but cheapest way possible!
Terms:
Price: Multiple
Collection or Post
Contact:
Rochard Bartholomew
Thetford
Ip27
UK
01842819969
email
Some interesting books for you!Some interesting books for you!Some interesting books for you!Some interesting books for you!

Wanted: Tom Senior M1 Vertical Milling head

Thu 9th Mar '17

Advert ID: 29200

Tools
Details:
Hi!
Has anyone out there got or know of a
a basic vertical milling head to suit my Tom Senior mill.
Anything usable or repairable considered.

Regards
Donald G Mackay
Achaguie
Scotscalder
Halkirk
Caithness
KW12 6XJ
01847 831 650
Contact:
Donald G Mackay
Halkirk
KW12
UK
email

For Sale: 32Dp gears

Thu 9th Mar '17

Advert ID: 29198

Materials
Details:
Assortment of Hardened 32 DP spur gears, 19 items in all as picture.
12 off 20t with boss
4 off 20t no boss
2 off 14t/21t
1 off 14t/25t

Price £5 plus £3 p&p
Terms:
Price: £5.00
Postage: £3.00
Collection or Post
Contact:
R Dacey
Peterborough
PE7
UK
01733 245317
32Dp gears

Wanted: D1-3 backplate

Wed 8th Mar '17

Advert ID: 29197

General
Details:
D1- 3 Camlock Backplate with or without studs
Contact:
Ian Pickering
Scarborough
YO12
UK
01723373871
email
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Welder

Wed 8th Mar '17

Advert ID: 29196

General
Details:
Sealey Power Welder.Power Welder 180
Model 180 XTD Fan Cooled. Mounted on castors,leads etc. Good condition,buyer to test and collect.
Terms:
Price: £35.00
Collection Only
Contact:
Ted Fletcher
Scarborough
YO12
UK
01723 362537
email

Wanted: Smart & Brown tooling

Tue 7th Mar '17

Advert ID: 29190

Tools
Details:
Looking for tooling for a Smart & Brown Model L. Particularly 3 and 4 jaw 4 inch chucks and a 7-1/2 inch faceplate on 1-3/4" x 8 tpi spindle thread (same I think as on S& B Sable and also Model M). Backplates as well if you have one. Can't collect unless local, but happy to pay reasonable postage.
Contact:
Francis Samish
Dorchester
DT2
UK
01308 897 911
email

Wanted: Inverter Welder

Tue 7th Mar '17

Advert ID: 29189

Tools
Details:
I'm after a good quality single phase inverter welder. Only required for arc welding at present but would consider one with Tig facility if available. I'm looking for something in very good order as this is a long term item to replace a recently deceased oil cooled set. Typical makes - Lincoln , Miller , Esab , Kempi , SIP etc. Prefer at least 150 amp with good duty cycle but open to suggestions.

Thanks
Contact:
Mike.
Brentwood
CM13
UK
email

For Sale: New Desk Monitor Arm with VESA Mount & Keyboard Tray

Tue 7th Mar '17

Advert ID: 29188

General
See all ads from Lee Richards
Details:
Can be wall or bench mounted

Combines a monitor arm and keyboard tray to create a high quality workstation solution.
Ideal for industrial,office and point-of-sale applications.
Can be wall or bench mounted
Suitable for TFT monitors up to 10kg and 385mm in height
75 & 100mm VESA mounting plate providing tilt and rotation (independant of keyboard swivel)
The 625x175mm (WxD) keyboard tray has enough space for a mouse
Height from top of desk to centre of VESA mounting plate is 460mm
Arm extends from 220 to 600mm
Keyboard tray swivels 320° left to right
Maximum clamp thickness of 95mm
Base clamp rotates 360°
Overall dimensions (HxWxD): 520x635x560mm at minimum extension
Foam wrist support and mouse pad.
Integrated cable management
Requires assembly
Terms:
Price: £45.00
Postage: Free
Delivery Only
Contact:
Lee Richards
Solihull
Bp1
UK
email
New Desk Monitor Arm with VESA Mount & Keyboard Tray

Wanted: drawngs for caradoc 3" scale boiler

Tue 7th Mar '17

Advert ID: 29187

General
Details:
wanted drawngings for 3" scale caradoc boiler .
Contact:
mark
exeter
ex22
UK
07849 698 539

Wanted: Ouside Jaws for Pratt Burnerd 5" Imperial 3 Jaw Chuck

Tue 7th Mar '17

Advert ID: 29185

Tools
Details:
Hi folk

Just wonder if someone can help please.

I'm looking for a set of three Outside Jaws for an Imperial Pratt Burnerd 5" 3 Jaw Scroll chuck (Model 9270-01305).

Tried the obvious like PB/600 Group but they only support the 125mm Metric Chuck ...

Also bought a set via eBay but they were wrong too!

Thank you in anticipation
Contact:
George
Lowestoft
NR34
UK
email


Disclaimer

Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.

By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.

We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.

In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.

We do not sell, hire, share or give out your email address.

The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.

So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new  and repeat visitors. It does not have any detail on who you are.

Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.

All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.

This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales. 

 

Donate

Want to help us fund the site and time spent by the people behind it then use the button below.

We are not a registered charity so you can't claim it back but it helps pay for the costs of improving the features.

You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.