Trade Adverts

Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the details…
Read more...
Call Steve Cox on 07836 736496 or email for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using flatbed Transit with rear mounted…
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours alloys using the lost wax process, ideal for the model engineer and restorer. Any enquiries and more details can be found on my web site. www.abbeycasting.c......
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea. Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact details. ...
Read more...
...
STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.

We also make other…
Read more...
Jurassic Tools here:-- https://www.jurass... Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. ...
Read more...
Home Workshop

defaultAll Adsrss

We have 97 adverts and 32 completed so far in June 2019
75 For sale adverts and of these 30 have sold.
10 Wanted adverts and of these 1 found what they needed.
7 Information adverts and 5 Thank you posts.


Last approved: Tuesday 18th June 2019 at 2:50
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking



STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...

Thank You: Model Steam Locomotives-Henry Greenly 1934

Mon 17th Jun '19

Advert ID: 35678

See all ads from John Lloyd
Details:
Advert Number: 35623
The Book has been sold. Thank you.
Contact:
John Lloyd

For Sale: HSS die set M3-M10

Mon 17th Jun '19

Advert ID: 35677

Tools
See all ads from Timothy Mercer
Details:
HSS linear Split die set M3-M10
New unused
Terms:
Price: £30.00
Postage: £3.50
Collection or Post
Contact:
Tim
Halifax
HX37
UK
01274674386
email
HSS die set M3-M10HSS die set M3-M10

Information: Locos from a friend

Mon 17th Jun '19

Advert ID: 35676

Models
Details:
Hi All,
I've been asked by the daughter of a fiend that has passed to the Great Workshop to get an idea of the value of a couple of the part-built locos that he has left in his workshop.
They are:
1. Part-built 5"G 0-6-2 Webb 'Coal Tank'
Chassis complete (but would need stripping to clean up. Boiler,tanks and cab parts.
2. A 'Juliet 0-4-0 chassis (Stephensons valve gear) with boiler and tanks part-built. Would need stripping and cleaning up.
There is also
a. Fobco Star 1/2" capacity bench drilling machine. 1 phase. Needs a clean-up.
b. A Milling machine vertical head attached to basic horizontal machine. Tatty, but worth the labour if you want/need one.
c. Small bench power hacksaw (homemade) but similar to a Kennedy
d.Boxford Power Shaping machine. Sound, but needs a clean-up.
I'm acting as temporary/acting/go-between with no financial interest.
If you would like a picture let me know. Donation will go the the back-room boys.
Stuart
North Staffs. area
01782 767587
Terms:
Contact:
Stuart Daw
UK
01782767587
email
Locos from a friendLocos from a friendLocos from a friend

For Sale: Eclipse punch set / dormer screw extractor set

Mon 17th Jun '19

Advert ID: 35675

Tools
See all ads from Timothy Mercer
Details:
Eclipse punch set
£25 p&p £3

Dormer screw extractor set
£35 p&p 3.50

New unused.
Terms:
Price: £3.00
Postage: £25.00
Collection or Post
Contact:
Tim
Halifax
HX37
UK
01274674386
email
Eclipse punch set / dormer screw extractor setEclipse punch set / dormer screw extractor setEclipse punch set / dormer screw extractor setEclipse punch set / dormer screw extractor set

For Sale: Practical Engineering bound volume VII

Mon 17th Jun '19

Advert ID: 35674

Books/Magazines
Details:
Volume VII, January 22nd,1943 to July 16th, 1943 (Nos 157 to 182). The cover is sound but grubby. The pages are untorn but suitably discoloured with age.

This book is a wealth of information and far to good to dump. A real collectors item

Free to a good home, just require the postage at cost.
Terms:
Price: Free
Collection or Post
Contact:
Malcolm Halford
Tidworth
SP9
UK
01980 842497
email
Practical Engineering bound volume VIIPractical Engineering bound volume VIIPractical Engineering bound volume VII

Information: How to correct saddle way wear

Mon 17th Jun '19

Advert ID: 35673

Machines
Details:
Hi All,

I have a Parkson 2N which has a tapered gib to adjust the saddle.

I've noticed that I can adjust out the play but the movement becomes very tight at either extreme of travel.

Does this indicate that the way has worn convex (hollow) ?

Is there a solution that doesn't involve taking the saddle off?

TIA,

Wilson Logan.
Contact:
Wilson Logan
UK
07711026653
email
How to correct saddle way wear
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

For Sale: Eclipse toolmakers clamp / scrapers

Mon 17th Jun '19

Advert ID: 35672

Tools
See all ads from Timothy Mercer
Details:
Eclipse 4" toolmakers clamp
£15

Eclipse bearing scraper 10" long
£12

Eclipse bearing scraper 13" long
£12

All unused.
Terms:
Price: £15.00
Postage: £3.00
Collection or Post
Contact:
Tim
Halifax
HX37
UK
01274674386
email
Eclipse toolmakers clamp / scrapersEclipse toolmakers clamp / scrapersEclipse toolmakers clamp / scrapersEclipse toolmakers clamp / scrapers

Wanted: Column Riser Block for Warco VMC Mill

Mon 17th Jun '19

Advert ID: 35671

Machines
See all ads from Glyn Davies
Details:
As per the title - I find I can only practically use the lower half of the knee travel before the table meets the drill chuck, so would like to raise the head of the machine. I think Myford used to supply accessory riser blocks for their VMC mills but have been unable to source one. Thanks.
Contact:
Glyn Davies
Leeds
LS15
UK
email

For Sale: Tom senior castings & tools book year 1939

Mon 17th Jun '19

Advert ID: 35670

Books/Magazines
See all ads from Timothy Mercer
Details:
Tom senior castings and tools book
Year 1939 72 pages excellent condition some slight staining on front cover.
Terms:
Price: £20.00
Postage: £2.50
Collection or Post
Contact:
Tim
Halifax
HX37
UK
01274674386
email
Tom senior castings & tools book year 1939Tom senior castings & tools book year 1939Tom senior castings & tools book year 1939Tom senior castings & tools book year 1939

For Sale: Machine vice 100mm jaw width unused

Mon 17th Jun '19

Advert ID: 35669

Tools
See all ads from Timothy Mercer
Details:
Machine vice jaw width 100mm
Jaw opening 100mm
Height of vice 65mm
Unused.
Terms:
Price: £40.00
Postage: £7.00
Collection or Post
Contact:
Tim
Halifax
HX37
UK
01274674386
email
Machine vice 100mm jaw width unusedMachine vice 100mm jaw width unusedMachine vice 100mm jaw width unusedMachine vice 100mm jaw width unused

For Sale: 4 way toolpost hobbymat

Mon 17th Jun '19

Advert ID: 35668

Tools
See all ads from Timothy Mercer
Details:
4 way toolpost hobbymat
2-1/4" Square
1-1/4" high
Takes tools with 1/2" shank
Excellent condition
Terms:
Price: £25.00
Postage: £3.50
Collection or Post
Contact:
Tim
Halifax
HX37
UK
01274674386
email
4 way toolpost hobbymat4 way toolpost hobbymat4 way toolpost hobbymat4 way toolpost hobbymat

For Sale: Low profile m/c vice unused

Mon 17th Jun '19

Advert ID: 35667

Tools
See all ads from Timothy Mercer
Details:
Machine vice low profile
Jaw width 80mm
Jaw opening 85mm
Overall height 55mm
Unused.
Terms:
Price: £60.00
Postage: £8.50
Collection or Post
Contact:
Tim
Halifax
HX37
UK
01274674386
email
Low profile m/c vice unusedLow profile m/c vice unusedLow profile m/c vice unusedLow profile m/c vice unused


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...

Thank You: Case for Gent's slave

Sun 16th Jun '19

Advert ID: 35666

See all ads from Duncan Webster
Details:
Advert Number: 35614
It's on it's way to Lincolnshire to be united with a genuine Gent's movement and live again
Thanks once again to admin. It would have been junked without ts site
Contact:
Duncan Webster

For Sale: Quick change toolpost

Sun 16th Jun '19

Advert ID: 35665

Tools
Details:
This toolpost is a genuine emco toolpost, it came off an emco lathe ,its the same size as a myford one .its in excellent condition ,sorry I don't have the hex spanner.the price includes postage postage within the uk.
Terms:
Price: Free
Postage: £55.00
Collection or Post
Contact:
Peter watt
Sunderland
Sr5
UK
07711331062
email
Quick change toolpostQuick change toolpost

For Sale: Taps and dies

Sun 16th Jun '19

Advert ID: 35664

Tools
Details:
Continuing with the workshop thinning out ,
Metric tap and die set 3 mm to 12 mm.
This came from a deceased friends workshop.no good to me as I work in imperial.
The price to include postage within the uk
Terms:
Price: £25.00
Postage: Free
Collection or Post
Contact:
Peter watt
Sunderland
Sr5
UK
07711331062
email

For Sale: Taylor Hobson Type D Pantograph - Engraver

Sun 16th Jun '19

Advert ID: 35663

Machines
Details:
Taylor Hobson Type D Pantograph - Engraver with drawers of brass letters and cutting tools also tool grinder and small bench top david brown engraver all 240 volts, been stood a few years but all work just need a good service too much to list more photos on request
Terms:
Price: £300.00
Collection Only
Contact:
kevin
Hull
Hu5
UK
01482446499
email
Taylor Hobson Type D Pantograph - EngraverTaylor Hobson Type D Pantograph - EngraverTaylor Hobson Type D Pantograph - EngraverTaylor Hobson Type D Pantograph - Engraver

For Sale: Ornamental Lathe by Hamann with sliding mandrel

Sun 16th Jun '19

Advert ID: 35661

Machines
Details:
Hamann ornamental lathe - see description of Hamann lathes in 'lathes.co.uk' CH 120/140mm with raising blocks. Good slide rest one three jaw chuck. Cast iron base with flywheel and crank but no treadle.
Terms:
Price: £400.00
Collection Only
Contact:
Peter Williams
Monmouth
NP25
UK
07595 504267
email
Ornamental Lathe by Hamann with sliding mandrelOrnamental Lathe by Hamann with sliding mandrel

For Sale: Ornamental Turning Lathe by Edward Hines of Norwich

Sun 16th Jun '19

Advert ID: 35660

Machines
Details:
Hines ornamental lathe - treadle operated complete with overhead and 10" ornamental slide rest.
Terms:
Price: £500.00
Collection Only
Contact:
Peter Williams
Monmouth
NP25
UK
07595 504267
email
Ornamental Turning Lathe by Edward Hines of NorwichOrnamental Turning Lathe by Edward Hines of NorwichOrnamental Turning Lathe by Edward Hines of NorwichOrnamental Turning Lathe by Edward Hines of Norwich
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

Thank You: Silver Steel

Sun 16th Jun '19

Advert ID: 35659

See all ads from Dave Corner
Details:
Advert Number: 35657
Now sold - Thanks to all
Contact:
Dave Corner

Thank You: Sold on day one

Sun 16th Jun '19

Advert ID: 35658

See all ads from Michael McNerney
Details:
Advert Number: 35637
Great website - thanks to all and best wishes to the buyer

My Warco Lathe is still available (advert 35635)
Contact:
Michael McNerney

For Sale: Jacobs chuck

Sun 16th Jun '19

Advert ID: 35656

Tools
Details:
Jacobs k13-ac30-3/8x24m craft chuck and key capacity 1.5- 13mm
New in box made in sheffield
Terms:
Price: £15.00
Postage: £1.00
Collection or Post
Contact:
J Bagshaw
Glossop
Sk13
UK
07943809379
Jacobs chuck

Thank You: durham

Sun 16th Jun '19

Advert ID: 35655

Details:
Advert Number: 35498
My thanks to this excellent site (once again) hope you live long and prosper
Contact:
David Bothwell

For Sale: Stainless Steel - Round & Hexagon - Grade 303 & 316

Sun 16th Jun '19

Advert ID: 35654

Materials
See all ads from Dave Corner
Details:
Stainless Steel - Round & Hexagon - Grade 303 & 316
Hexagon
316 - 3/4” x 600mm - 1.49kg 316 - 13mm x 240mm - 0.27kg
Round
316 - 5/8” x 600mm - 0.96kg 316 - 5/8” x 270mm - 0.43kg
303 - 1/2” x 600mm - 0.59kg 303 - 12mm x 360mm - 0.32kg
303 - 12mm x 390mm - 0.35kg 303 - 12mm x 200mm x 2 - 0.36kg
316 - 10mm x 490mm - 0.3kg 303 - 8mm x 600mm - 0.23kg
303 - 8mm x 570mm - 0.22kg 303 - 8mm x 430mm - 0.17kg
303 - 1/4” x 570mm - 0.12kg
All the above is new material with slight corrosion on some pieces from storage.
Price £40.00 for all the stainless steel listed (5.81kg)
Postage to most UK destinations £7.00. Can be collected from Folkestone Kent which is my preferred option.
Terms:
Price: £40.00
Postage: £7.00
Collection or Post
Contact:
Dave Corner
Folkestone
CT20
UK
01303
email
Stainless Steel - Round & Hexagon - Grade 303 & 316

Information: Myford super 7 type clutch

Sun 16th Jun '19

Advert ID: 35653

Machines
Details:
I have a Myford ML7R with a new Super 7 type clutch which has not been used for some time and the clutch unit appears to be stuck closed. It maybe just congealed oil in the clutch itself but there is no way determining this. Anyone any thoughts on how release it again without damage as so far it has defeated my efforts!
Contact:
Richard Hersey
UK
01270 215695
email


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...

Information: Update complete

Sat 15th Jun '19

Advert ID: 35650

General
See all ads from Adam Stevenson
Details:
Well the update has completed and test have passed, Edge still don't like it but MS can shove it. Chrome and Firefox are working fine and so is IE and Opera.
Contact:
Adam Stevenson
UK
07526637979
email
Update complete

For Sale: Model Engineer Magazines

Sat 15th Jun '19

Advert ID: 35647

Books/Magazines
Details:
Some 30 copies of Model Engineer
Vol.130 1964 no.3242- 3263. (Some missing)
Vol.131 1965 no3264-3276.
All but one In fair condition for age
Free if collecte. (possibly could post at cost.)
Terms:
Price: Free
Collection Only
Contact:
Colin Wilson
Cromer or Norwich
NR11
UK
01263720528
email

For Sale: Parallels - Set of 10 pairs - 1/8” thick.

Sat 15th Jun '19

Advert ID: 35644

Tools
See all ads from Dave Corner
Details:
Parallels - Set of 10 pairs - 1/8” thick.
From ½” to 15/8”deep in 1/8” increments - 6” long
In excellent condition in a plastic tray. Originally purchased from MSC Industrial. Only used in my home workshop.
Collection from Folkestone Kent or post to most UK destinations for £7.00
Terms:
Price: £45.00
Postage: £7.00
Collection or Post
Contact:
Dave Corner
Folkestone
CT20
UK
01303
email
Parallels - Set of 10 pairs - 1/8” thick.

Information: Warning

Sat 15th Jun '19

Advert ID: 35642

General
Details:
Beware this man named Steve Joseph or possibly Joseph Steve. He phones to say he will buy something, arranges a collection date then failed to turn up - twice.
His mobile no is 0783164640

Best avoided
Derek Newman
Contact:
Derek J Newman
UK
01255830411
email

For Sale: Springbok boiler, 5" gauge

Sat 15th Jun '19

Advert ID: 35641

Models
Details:
A new 5" gauge Springbok boiler. CE marked with certificate.
Terms:
Price: £3,550.00
Postage: £45.00
Collection or Post
Contact:
Ron
Wolverhampton
WV14
UK
07845736165
email

For Sale: Insulation Board

Fri 14th Jun '19

Advert ID: 35636

Materials
Details:
Two BRAND new, never been used sheets of Black Electrical Insulation Board approx. 21" x 21" x 1/4" no scratch marks. Would make nice stationary engine generator control panel. £50 the pair will split. Prefer buyer to inspect and collect to avoid damage.£50 the pair will split. Plus £7 by myhermese.
Also, new old stock "Lister" 10 amp ammeter still in paper packaging and original cardboard box. £15 Plus P&P £4 or collect.
Terms:
Price: £50.00
Postage: £7.00
Collection or Post
Contact:
Ted Fletcher
Scarborough
YO12 6RA
UK
01723 362537
email
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

For Sale: Warco Lathe WM240

Fri 14th Jun '19

Advert ID: 35635

Machines
Details:
Used only lightly since purchase in 2014.

Forward and reverse variable speed motor with digital rev counter. Complete with Warco stands. Includes face plate, 3 and 4 jaw chucks, steadies, drill chuck, live centre, quick change tool post with tool holders.

The Warco website gives a detailed description of the machine and I have posted a photo of the main specifications.

I am not able to continue with my model engineering hobby hence this opportunity for you to purchase this excellent machine.

Buyer collect - No postage option

This lot would cost over £1600 new. I paid £1300 Asking £900 ono
Terms:
Price: £900.00
Collection Only
Contact:
Michael McNerney
Ormskirk
L39
UK
07909505686
email
Warco Lathe WM240Warco Lathe WM240

Wanted: Tobler mandrel T-EP-10

Thu 13th Jun '19

Advert ID: 35630

Tools
See all ads from Victor Scott
Details:
A long shot, I know,

Tobler expanding mandrel (mandrel only no sleeves required) size T-EP-10

Many Thanks, Vic..
Contact:
Victor Scott
Appin
PA38
UK
01631 740270
email

Wanted: Myford ML7/Super7 stand with tray

Wed 12th Jun '19

Advert ID: 35616

Machines
Details:
Cosmetically not important so long as straight and solid.
Contact:
John H
Bridlington
YO16
UK
jr1400691@gmail.com
email

For Sale: Various Tools

Wed 12th Jun '19

Advert ID: 35613

Tools
Details:
5/16 CH diehead,2 MT shank,with sets of 1/4"BSW and 2BA chasers. £35

Eclipse 523S toolbit holder for 1/4"bits. With correct key. Unused old stock £12

Caliper type knurling tool. Believed to be J&S/Marlco. N.O.S £18

Bristol Erickson 40Int collet chuck-takes TG100 collets. With Valenite ball-bearing nut. Good used condition but no collets
£30
Collection or post.
Terms:
Price: Multiple
Collection or Post
Contact:
Angus
Norwich
IP21
UK
email
Various ToolsVarious ToolsVarious ToolsVarious Tools

Wanted: Bending Die V-block

Tue 11th Jun '19

Advert ID: 35604

Tools
Details:
Looking for a bending die with a few different 90 channels. Ideally around 500mm long for homemade press brake.
Or any ideas where to get one.
Contact:
Luc Davenport
Congleton
CW12
UK
email

Information: Running costs

Tue 11th Jun '19

Advert ID: 35603

General
See all ads from Adam Stevenson
Details:
I just want to say a massive thank you to all who have donated to the site and the massive help we had at Christmas which saw the addition of a new programmer, I know many will not of seen her work but the back end, well I very rarely have to login to as most of the moderating can be done from the front end now, has been brilliant.
That said the hosting costs have just been increased and the servers requirements will also increase with the addition of the site doing the resizing of images for you, no more this image is too big but still a max of 10MB per image soon. Also the advertising has dropped massively due to the GDPR requirements to gain explicit consent and most people using ad-blockers means that the sites monthly income is now every 2-3 months and most don't even cover the monthly cost.

Now I'm not asking for big handouts but a few monthly donations would allow Megan and me to carry on the hard work of keeping this beast alive.
The donate button is on the left hand menu and as said you can make small monthly donation instead of a big donation. We will not be forcing you ever to pay for placing adverts or looking at them but do think of us when you sell something like many have.

PS. Megan has given the submit system a boot in the ass so that over protective AV software should stop breaking the form. If anyone else is having issues please email me as we want to find out why but Avast might be the reason.
PPS BT has decided that we are spamming them again and I am not going to spend ages trying to obey their rules when we are not even breaking them, all emails from this site are in relation to your account or advert that you requested.
Contact:
Adam Stevenson
UK
email


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...

For Sale: Hand Taping Machine with Magnetic Vice and ER16 Collets.

Tue 11th Jun '19

Advert ID: 35601

Materials
See all ads from Dave Corner
Details:
Hand Taping Machine with Magnetic Vice and ER16 Collets.
Hand taping machine mounted on a surface plate 480mm x 370mm with diagonal clamping slots. 410mm from surface plate to under top bar. Total weight approximately 35kg.
Full set of ER16 collets 1mm to 10mm for tap mounting. 75mm machine vice with magnetic base to hold work. For larger work 10 nuts to fit diagonal slots taped M6.
I very rigid machine giving excellent results. A guaranteed way of taping every hole square to the drilling. Regularly used to tap holes 10BA to 10mm.
Selling due to my now limited mobility.
Collect from Folkestone Kent preferred but could post if the buyer meets the cost which is likely to be around £40.00
Terms:
Price: £150.00
Postage: £40.00
Collection or Post
Contact:
Dave Corner
Folkestone
CT20
UK
01303
email
Hand Taping Machine with Magnetic Vice and ER16 Collets.Hand Taping Machine with Magnetic Vice and ER16 Collets.Hand Taping Machine with Magnetic Vice and ER16 Collets.Hand Taping Machine with Magnetic Vice and ER16 Collets.

For Sale: Clarkson S type Autolock. 3MT

Mon 10th Jun '19

Advert ID: 35600

Tools
Details:
Like new 3MT Clarkson Autolock. No box, collets or key with it. Unmarked apart from the imprint of the polystyrene packaging it was in at one time and an engraved code number.
Terms:
Price: £17.50
Postage: Free
Collection or Post
Contact:
John Blakeley
Skipton
BD23
UK
07506800446
email
Clarkson S type Autolock. 3MTClarkson S type Autolock. 3MT

For Sale: Tip tool,holder

Mon 10th Jun '19

Advert ID: 35599

Tools
Details:
I have a used Swedish COROMANT T-Max tip tool holder,half inch square - TFPR-8 hR177 2 - 1313. It uses a screw with a purpose bent bar to hold the tip in place.
Comes with a key for the screw.

It does NOT use the tips with screw through the centre.
Terms:
Price: £10.00
Postage: Free
Collection or Post
Contact:
Robin Jeffery
Hornchurch
RM11
UK
01708451564
email

For Sale: Cowells 90ME Lathe

Sun 9th Jun '19

Advert ID: 35595

Machines
See all ads from Andy Evans
Details:
Cowells lathe with 3 jaw scroll chuck, 4 jaw, a new set of boxed 6mm HSS tools and a new drive belt. Good condition, recently serviced all works well.
Terms:
Price: £650.00
Collection Only
Contact:
Andy Evans
York
UK
email
Cowells 90ME Lathe

For Sale: 3 Ton Arbor Press

Sun 9th Jun '19

Advert ID: 35593

Tools
See all ads from Steve Murray
Details:
This Excel arbor press doesn't look like it has ever properly been used, there's not a mark on the base plate, anvil, or ram that I can see. There are some minor corrosion marks on the body where the paint has been scratched and a few other marks on the paintwork, but the ram and exposed steel are unblemished and have now been cleaned and greased.
These are still sold by Excel and cost £342 plus delivery. It is made in Taiwan and weighs 67 Kg. It certainly looks and feels like a robust tool.
Ideally this is for collection only, though I may be able to deliver depending on where you live. This thing is heavy but will fit into any car boot, and I can load it for you if needs be.
Specs are:
Pressing capacity: 3 Ton
Press Height: 23.5"
Max. Work Height: 12"
Base Dimensions: 18" x 8"
Throat Depth: 6.5"
Weight: 67 Kg (near 150 lb)
Terms:
Price: £120.00
Collection or Delivery
Contact:
Steve Murray
Prestatyn
LL18
UK
email
3 Ton Arbor Press3 Ton Arbor Press3 Ton Arbor Press3 Ton Arbor Press

For Sale: Mitutoyo Bore gauge

Sun 9th Jun '19

Advert ID: 35592

Tools
Details:
Mitutoyo 50-75mm bore gauge in good condition. Still has the original polystyrene box. Postage to mainland Uk included £90
Terms:
Price: £90.00
Postage: Free
Collection or Post
Contact:
Johnny Dennett
Rye
Tn31
UK
email
Mitutoyo Bore gaugeMitutoyo Bore gaugeMitutoyo Bore gauge
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

For Sale: Meddings MB4 mk3 Drill Press 240volt

Sun 9th Jun '19

Advert ID: 35591

Machines
Details:
A Meddings MB4 Mk3, probably the finest of the small drill presses Meddings ever made. Rock solid and very precise.
As Standard this is 80 to 4000 rpm but this is fitted with a three phase Variable Frequency Drive (plugs straight in to a 13amp socket) and you can vary the speed straight from the controller so from a crawl to 4000+ rpm.

I have filled the marks in the table with weld and ground it back so it is unmarked. This example is fitted with the rise and fall table and all of the shiny bits have been re-chromed. It is an exceptionally clean example with no signs of abuse. In low gear at 80 rpm this thing is unbelievably powerful. Only selling as I am replacing it with a Mill and I need the space.

Comes with a Jacobs 58B chuck. Collection from OL5 area code.
Terms:
Price: £500.00
Collection Only
Contact:
Martin
Manchester
OL5
UK
email
Meddings MB4 mk3 Drill Press 240voltMeddings MB4 mk3 Drill Press 240voltMeddings MB4 mk3 Drill Press 240voltMeddings MB4 mk3 Drill Press 240volt

For Sale: SC3-400 HiTorque Mini-Lathe - Belt Drive - Brushless Metric

Sun 9th Jun '19

Advert ID: 35587

Machines
Details:
Brought about 2 years ago from Arc-Euro, other than using it to turn up a backplate to mount a 100mm chuck on it the Lathe has not been used so it is time for it to go and to give us back some space.

The original 80mm Chinese 3 jaw has been lost somewhere ( didn't like it the hole through it was too small) and it had been sharing a TOS 100mm chuck with the Myford. The Myford is going to keep that chuck, a replacement 80 mm chuck is available from Warco for £63 but I would recommend buying a 100mm chuck instead, the extra back plate is included to do this. All the other original equipment comes with it including the splash back, tray and chuck guard.

It comes with a fitted ER32 collet chuck and a full set of 1/16" step ER 32 Imperial collets up to 13/16" plus an additional 7/32" collet. included is Dave Fenner’s two books about the lathe and things to build with it.

£450 Ono. Collection only
Terms:
Price: £450.00
Collection Only
Contact:
Jo Thoms
Bordon
GU35
UK
01420 474414
email
SC3-400 HiTorque Mini-Lathe - Belt Drive - Brushless MetricSC3-400 HiTorque Mini-Lathe - Belt Drive - Brushless Metric

Wanted: stepper motor and driver

Sat 8th Jun '19

Advert ID: 35585

CNC
See all ads from Duncan Webster
Details:
I'm looking for a NEMA 34 stepper motor with at least 6N.m torque, and a driver to go with it, preferably 80V input.
Search under your bench and get in touch otherwise I'm going to have to raid the grandkids' piggy banks
Contact:
Duncan Webster
warrington
wa4
UK
01925262525
email

For Sale: Hit & Miss engine

Sat 8th Jun '19

Advert ID: 35584

Models
Details:
This is a part built model of Jerry Howell's "Farm Boy" Hit & Miss Gas Engine (see on line for details) which for various reasons I will be unable to complete.
As you can see the main part is finished including the crankshaft con rod, cylinder,piston, gearing,governor,flywheels etc. There are full set of plans material for cylinder head, magnet, stainless rod for ignition gear which is the part to be made to complete.
I'm asking for £125 to cover cost of drawings etc.
Collection would be best but possibly could be sent by courier at cost
Terms:
Price: £125.00
Collection or Post
Contact:
Colin Wilson
Norwich or Cromer
NR11
UK
01263720528
email
Hit & Miss engineHit & Miss engineHit & Miss engine

For Sale: Model Engineer

Sat 8th Jun '19

Advert ID: 35583

Books/Magazines
See all ads from Phil Waddingham
Details:
We have several volumes of Model Engineer for sale, volumes 141, 142,143,144,145.

Vol No Start To End No
3504 3 Jan 1975 3527
3528 2 Jan 1976 3551
3552 7 Jan 1977 3375
3576 6 Jan 1978 3599
3600 5 Jan 1979 3623

There are the following issues missing,

3515,3544,3573,3584

Would prefer to sell as a whole for £25 plus postage.
Would consider £5 per volume plus postage.

Could collect if required.
Other volumes available, just ask.
Terms:
Price: £1.00
Postage: £6.00
Collection or Delivery
Contact:
Phil Waddingham
Sheffield
S6 1
UK
07340814722
email

Wanted: Volunteer for small machining job

Sat 8th Jun '19

Advert ID: 35581

General
Details:
Hello,

I'm looking for someone to machine circlip grooves into some (30) 12mm (L) stainless rods of 4mm diameter.

Two grooves per shaft inset 1mm from each end.

Not the most exciting project I know but for a historic narrowboat. Full details on reply.

I don't expect charity so please feel free to quote me for your time.

Thanks for reading.
Contact:
Chris Poole
Cardiff
CF64
UK
07733004258


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...

For Sale: Britool socket set

Sat 8th Jun '19

Advert ID: 35580

Tools
Details:
Britool na760c 62 piece socket set in pristine unused condition with original britool shipping carton
Terms:
Price: £500.00
Postage: £10.00
Collection or Post
Contact:
James bagshaw
Glossop
Sk13
UK
07943809379
Britool socket set

Wanted: Guard

Fri 7th Jun '19

Advert ID: 35577

Machines
Details:
I am looking for a guard for rear gears on a Myford lathe M type which is their early type model pre war
Contact:
John Edwards
Morecambe
LA3
UK
email

Wanted: Tapping head and centring microscope.

Thu 6th Jun '19

Advert ID: 35570

Tools
Details:
For use in a Bridgeport mill, a tapping head with clutch/torque adjustment and automatic reverse. Also a centring microscope.
Contact:
Simon Moore
Oxford
OX3
UK
01865725776
email

Wanted: Watchmaker's Lathe

Wed 5th Jun '19

Advert ID: 35569

Tools
Details:
STAR (Swiss)8mm watchmaker's lathe.
Contact:
Lloyd Williams
Slough
SL2
UK
01753 662285
email

For Sale: Mitutoyo digital depth mic

Wed 5th Jun '19

Advert ID: 35568

Measuring
Details:
Mitutoyo depth mic ,0 to 6" in good condition apart from the initials marked on the body ,the lettering around the function buttons a bit faded ,but all up in good working condition.the price includes postage within the the uk .
Terms:
Price: £75.00
Postage: Free
Collection or Post
Contact:
Peter watt
Sunderland
Sr55
UK
07711331062
email
Mitutoyo digital depth mic

For Sale: Solid carbide end mills

Wed 5th Jun '19

Advert ID: 35566

Tools
Details:
Continue to downsize workshop I have some
8mm 5 flute endmills ,made by sgs Kyocera
Made in the uk .these are solid carbide .these are old stock and retail for about £30 each .
Some are boxed some are covered Ina wax coating.i am selling in lots of 5 ea .the price includes postage within the uk .on a first come first served basis.
Terms:
Price: £26.00
Postage: Free
Collection or Post
Contact:
Peter watt
Sunderland
Sr55
UK
07711331062
email
Solid carbide end mills
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

For Sale: Myford Super 7

Wed 5th Jun '19

Advert ID: 35565

Machines
Details:
This Myford Super 7 comes with a gearbox and Myford stand.It runs on single phase electrics.

The following accessories are included in the sale.

3 jaw CC 4" Pratt Burnerd chuck.
4" independent chuck.
4 way tool post.
Traveling steady.
Myford QCTP with 7 holders.
Catch plate.
Spare back plate.
Face plate.
Myford universal vertical slide.
Small tooling included.

The lathe is in very good condition overall,although not used recently as the owner has now decided to sell.Some surface rusting has occurred but,easily restored with a bit of TLC.
Can be viewed in Upminster.
Access is easy and all on the flat from workshop to road.It would require some brawn to shift.
Negotiation on the price is possible.
Terms:
Price: £3,200.00
Collection Only
Contact:
R.Jeffery
Hornchurch
RM11
UK
01708451564
email

For Sale: Engraving machine

Wed 5th Jun '19

Advert ID: 35564

Machines
Details:
We have a floor standing model Taylor Hobson engraving machine which is in good working order.We need to move it as it is taking up much needed space It comes with some accessories,please phone for more information.

It can be seen at Epping,Essex and being very heavy would need three or four people to shift it,hence collection only.Some beef is on hand to help.
Terms:
Price: £100.00
Collection Only
Contact:
R.Jeffery
Hornchurch
RM11
UK
01708451564
email

For Sale: In the tracks of the West Clare Railway by Edmund Lenihan

Wed 5th Jun '19

Advert ID: 35561

Books/Magazines
Details:
In the tracks of the West Clare Railway by Edmund Lenihan
This is a comprehensive guide to what remains of this much loved narrow gauge railway which closed in 1961. This book is a record of a walking journey along the entire length of the railway from Ennis to Kilkee/Kilrush.
It is in clean and sound condition – like new really.
£8 including UK postage.
Terms:
Price: £8.00
Post Only
Contact:
Eric Clark
Milton Keynes
UK
email
In the tracks of the West Clare Railway by Edmund LenihanIn the tracks of the West Clare Railway by Edmund Lenihan

For Sale: 3 phase motor

Tue 4th Jun '19

Advert ID: 35557

General
Details:
3ph Two speed Brook motor 710/1420 rpm.
380-420volts 0.75 hp.

Although it is a 420v motor I have run it from a 230v inverter at 29Hz but there is some loss of power.
Runs smoothly and quietly, comes from a Smart & Brown model L lathe.
1" shaft diameter.

Pickup only due to weight from CO16 Clacton area.
Terms:
Price: £15.00
Collection Only
Contact:
David
Clacton on Sea
CO16
UK
email
3 phase motor3 phase motor

For Sale: Set Imperial Taps and Dies

Mon 3rd Jun '19

Advert ID: 35555

Tools
Details:
Boxed set of taps and dies. Imperial sizes.
Terms:
Price: £35.00
Postage: £5.00
Collection or Post
Contact:
Allen LANCELEY
Otford
TN14
UK
01959525078
email

For Sale: MGF Workshop Manual

Mon 3rd Jun '19

Advert ID: 35550

Books/Magazines
See all ads from Tony Storrie
Details:
I have an MGF workshop manual that needs a new home. I would rather it was collection only as it is a big heavy thing (A4 loose leaf binder about three inches thick).
I'm asking £10 for it with proceeds to this website.
Terms:
Price: £10.00
Collection Only
Contact:
Tony Storrie
Northfleet
DA13
UK
01474 833274
email


Disclaimer

Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.

By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.

We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.

In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.

We do not sell, hire, share or give out your email address.

The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.

So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new  and repeat visitors. It does not have any detail on who you are.

Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.

All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.

This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales. 

 

Donate

Want to help us fund the site and time spent by the people behind it then use the button below.

We are not a registered charity so you can't claim it back but it helps pay for the costs of running the site and improving the features.

You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.