Jurassic Tools Ebay shop here:--https://www.ebay.c... Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. ...
Want to help us fund the site and time spent by the people behind it then use the button below.
You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.
We have 38 adverts and 5 completed since 2nd May 2026 35 For sale adverts and of these 4 have sold. 3 Wanted adverts and of these 1 found what they needed. no Information adverts and no Thank you posts.
Last approved: Monday 1st June 2026 at 17:06 Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: A long-reach Hedge Trimmer, for those difficult to reach areas. Adjustable angle etc. Good working condition. Not as hard to transport as you may expect (it fits in an MG3, for example) so collection should be practical for most people, unless you have a very small car. Collect from Welwyn Garden City (Mon-Fri, between 8am and 4pm only). Alternatively, collection could be arranged from just outside M25 J.25 (Waltham Cross) evenings and weekends. Collection only; reasonable offers considered. (This is a private sale; all proceeds to my local Hospice).
Machines (Large Tooling) Excellent State (Well maintained)
Details: Record power TS250-RS Table Saw. For sale due to Retirement Low hours. One man owned and operated from new. Includes optional Heavy Duty Sliding Beam & Squaring Frame shown in pics. Works from a normal plug Tooling shown included. Wheels included. Perfect operating condition, ready to go to work. more pictures available by email delivery available locally. ask for a price. free if very local. 500 ONO price reduced
Terms: Price: £500.00 Collection or Courier/Delivery
Contact: James Heidler Advertising for: Adrian Heidler Bodmin PL31 UK
Details: A good usable working inspection tool. Great for checking grinds etc. On a wheeled trolley. Collect from just North of Cardiff J34 M4 Has been converted to LED but easy to put back to Bulb.
Details: A Hilger & Watts Clinometer, Model TB108-1 with magnifier. Complete with original box. Very good used condition - see photos; more can be sent via email on request. Very good working condition & cosmetics. Will be carefully packed for posting, with plenty of padding etc. Collection can be arranged (Just outside M25 J.25), or postage at cost (RM Tracked 48 with signature). Payment via Paypal "Friends and Family" or Bank Transfer please. Reasonable offers considered.
Terms: Price: £50.00 Postage: £8.95 Collection or Royal Mail
Machines (Large Tooling) Renovate (Complete but not finished)
Details: I have for sale a vintage colchester master flat belt driven gap bed centre lathe complete with chuck,faceplate,travelling steady ,change wheels and comes with a length of drive lineshaft. Collection only due to size and weight Cash on collection please.
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Tools & Parts (Small tooling) Used (Correct working)
Details: This is a selection of reamers. £1 each plus postage at cost (which should be less than £3 unless you want more than 1kg). The photographs show them in the same order as this list. 75p each if you collect them. I don't know what size the last two items on the list are. I'd be interested to know if anyone can decode the markings on them. I'd also be interested to know if anyone can tell me what the last item in the first photograph is for. It appears to be a 3 fluted drill but has no point. Photograph 1 No 2 Morse Taper BSA brand 3/4 Inch Spiral fluted Reamer No 2 Morse Taper BSA 3/4 Inch Straight fluted Reamer No 2 Morse Taper FOWLER 3/4 Inch Straight fluted Reamer No 2 Morse Taper CLEVELAND 3/4 Inch Spiral fluted Reamer No 2 Morse Taper BALFOUR 13/16 Inch Spiral fluted EXPANSION Reamer No 2 Morse Taper DORMER 23/32 Inch Spiral fluted Reamer No 2 Morse Taper BALFOUR 11/16 Inch Spiral fluted EXPANSION Reamer No 2 Morse Taper ROSSELL 11/16 Inch Spiral fluted LEFT HAND Reamer No 2 Morse Taper ROSSELL 5/8 Inch Spiral fluted LEFT HAND Reamer No 2 Morse Taper 5/8 Inch Spiral fluted Reamer No 2 Morse Taper DORMER 5/8 Inch Spiral fluted Reamer No 2 Morse Taper 37/64 Inch Spiral fluted Reamer No 2 Morse Taper 3 fluted 37/64 drill that has been reground to 9/16 Photograph 2 No 1 Morse Taper 9/16 Inch Spiral fluted Reamer No 1 Morse Taper 9/16 Inch Straight fluted Reamer No 1 Morse Taper 1/2 Inch Spiral fluted Reamer No 1 Morse Taper 7/16 Inch Spiral fluted Reamer No 1 Morse Taper FOWLER 7/16 Inch Straight fluted Reamer No 1 Morse Taper PRESTO 3/8 Inch Spiral fluted Reamer No 1 Morse Taper PRESTO 3/8 Inch Spiral fluted Reamer No 1 Morse Taper DORMER 3/8 Inch Spiral fluted Reamer No 1 Morse Taper FOWLER 3/8 Inch Straight fluted Reamer No 1 Morse Taper RAPIER 3/8 Inch Straight fluted Reamer Hand Reamer 3/8 Inch Spiral fluted Reamer Hand Reamer 3/8 Inch Spiral fluted Reamer Hand Reamer 3/8 Inch Spiral fluted Reamer No 1 Morse Taper 3/8 Inch Spiral fluted Reamer Hand Reamer PRESTO 5/16 Inch Spiral fluted Reamer Photograph 3 No 1 Morse Taper FIRTH 5/16 Inch Spiral fluted Reamer No 1 Morse Taper CLEVELAND 5/16 Inch Spiral fluted Reamer Hand Reamer 5/16 Inch Spiral fluted Reamer Hand Reamer EOS 5/16 Inch Spiral fluted LONG Reamer Hand Reamer DORMER 5/16 Inch Spiral fluted Reamer No 1 Morse Taper 5/16 Inch Spiral fluted LONG Reamer No 1 Morse Taper BROOK 5/16 Inch Spiral fluted Reamer Chucking Reamer 5/16 Inch Straight fluted Reamer No 1 Morse Taper PRESTO 1/4 Inch Spiral fluted Reamer No 1 Morse Taper GCDC 1/4 Inch Spiral fluted Reamer Hand Reamer 1/4 Inch Spiral fluted Reamer Hand Reamer 1/4 Inch Spiral fluted Reamer No 1 Morse Taper PRESTO 3/16 Inch Spiral fluted Reamer No 1 Morse Taper MORSE 3/16 Inch Straight fluted Reamer No 1 Morse Taper TWO DOGS 3/16 Inch Spiral fluted Reamer Hand Reamer N/L 3/16 Inch Straight fluted Reamer Hand Reamer 5/32 Inch Spiral fluted Reamer Hand Reamer SKF 1/8 Inch Spiral fluted Reamer Photograph 4 No 2 Morse Taper CLEVELAND 22mm Inch Spiral fluted Reamer No 1 Morse Taper 10mm Inch Spiral fluted Reamer No 1 Morse Taper PRESTO 6mm Inch Spiral fluted Reamer Chucking Reamer about 5mm Inch Straight fluted Marked 116-990-2004 Reamer No 1 Morse Taper about 8mm Inch Spiral fluted Marked 0.9750 orC.9750 SR 45392 Reamer
Terms: Price: Multiple Postage: £3.00 Collection or Royal Mail
Contact: Russell Talbot HIGH PEAK SK23 UK 07753313163
Details: Clarke grit blast cabinet that has only been used a couple of times and is now no longer wanted. Comes with two sacks of abrasive grit. Very nice bit of kit. Collection only please.
Terms: Price: £300.00 Collection Only
Contact: Graham Gardner Gloucester GL51 UK 01242 580548 + 07870900332
Details: This is a large, hand operated 3 in 1 shear, brake, roll. It is designed to work 16g x 52” mild steel. I bought it for a particular project but did not use it. I think it had been used in a car bodyshop at some time as there is a little spray paint on it. Weight is 1200 lbs, 544kilos. This machine is still available new. If you are interested I will send more photos but I will need to clear stuff off it first.
Details: Castings part set, part machined for a Stuart Turner No4 Vertical engine. Found in a workshop clear out. Despite a fractionaly offset casting at the lower end the crosshead bore is coaxial with the cylinder bore, I have checked this with a wring fit mandrel through the stuffing box and a dummy piston, as see the last picture, Both bores are smooth but cylinder will need lapping. The bolt pitching for the top cover is a one position only. No box bed or other castings I am afraid, if the do turn up I will contact the buyer. I think that these castings are quite as they are not quite as crisp as the Walton on Thames products. without the box it stands 8.5" high. I am asking £75, less than the cost of the baseplate casting alone from S-T's! Thank you for looking!
Terms: Price: £75.00 Postage: £6.00 Collection or Royal Mail
Contact: Peter Watkinson Chard TA20 UK 01460 67320
Materials (Consumable) Old Stock (New but storage spoil)
Details: 2 tubs of Silver Solder Stub ends and offcuts Approx 2.2kg of offcuts in different grades total weight Approx 60% weight in C.u.p Alloys 455 grade silver solder Approx 40% weight in old type J.M “ Easyflo” cadmium inclusive solder. Collected and saved during the last 30+ years of use. Random lengths from 1” up to 4”- 41/2” long, all at 1.6mm diameter, see photos.
Terms: Price: £75.00 Postage: £13.00 Collection, Courier/Delivery or Royal Mail
Contact: William Clark Swindon Sn25 UK 07599172989
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: Hi, doe's any one hanve any info on this machine i know that it was made in London, and if there is anything is missing as my 2 young grandsons are wanting to use it thanks tom
Details: Boxford AUD Metal Lathe Screwcutting Gearbox , Power Cross and Long Feeds , Coolant Pump and Tank , Low Voltage Light Unit , Metric Dials , 3 Phase ( Star Delta ) Motor Fitted 3 and 4 Jaw Chucks , Catch Plate , Drill Chuck , Live and Dead Centres , HSS Tools
Terms: Price: £800.00 Collection or Courier/Delivery
Contact: Trader Bede Tools and Machinery Jarrow UK
Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.
By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.
We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.
In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.
We do not sell, hire, share or give out your email address.
The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.
So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new and repeat visitors. It does not have any detail on who you are.
Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.
All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.
This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales.
All Ads
