Trade Adverts

Call Steve Cox on 07836 736496 or email for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using flatbed Transit with rear mounted…
Read more...
Jurassic Tools here:-- https://www.jurass... Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. ...
Read more...
...
STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.

We also make other…
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours alloys using the lost wax process, ideal for the model engineer and restorer. Any enquiries and more details can be found on my web site. www.abbeycasting.c......
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea. Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact details. ...
Read more...
Home Workshop

defaultAll Adsrss

We have 156 adverts and 41 completed so far in February 2020
125 For sale adverts and of these 39 have sold.
22 Wanted adverts and of these 1 found what they needed.
5 Information adverts and 2 Thank you posts.


Last approved: Sunday 23rd February 2020 at 13:49
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking

I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Norton Arbor press

Sun 23rd Feb '20

Advert ID: 37272

Tools
Details:
Norton arbor press.
This is a high quality CAST press, not fabricated . The listed price of this was £1103 ! (see website)

This was used one time only for pressing copper rivets into aluminum traction engine (Minnie) wheels and is in perfect condition, no rust or damage,includes rotary anvil and a bench mounting plate.

Gap is 4.5" and back to column centre is 2.5"
Weight is 7kilos

Payment by Paypal
Terms:
Price: £120.00
Postage: £10.00
Collection or Post
Contact:
William Burns
Comber
BT23
UK
email
Norton Arbor pressNorton Arbor pressNorton Arbor pressNorton Arbor press

For Sale: Roller burnishers

Sun 23rd Feb '20

Advert ID: 37271

Tools
Details:
Roller burnishers
2 morse 25mm,32mm £30 each

1 morse 18mm,25mm £25 each

1 morse 3/8in 4off £20 each
Terms:
Price: Multiple
Collection or Post
Contact:
dave akhurst
tonbridge
tn11
UK
01892 740572
email
Roller burnishersRoller burnishers

For Sale: BT30 tooling

Sun 23rd Feb '20

Advert ID: 37270

Tools
Details:
Nikken Bt30-c22-7520mm collet £60
No make Bt30 with herbert microbore tips £50
Morris Bt30 2029001 tapping tool 14mm collet 2off £30 each
Bt30 Rego-Fix 632-220 er3214/13 collet £50
Bt30 Kenametal E404050753270 er32 20mm collet £40
Bt30 Kenametal 3off 20mm,1off 16mm 1off 8mm £25 each
Terms:
Price: Multiple
Collection or Post
Contact:
dave akhurst
tonbridge
tn11
UK
01892 740572
email
BT30 toolingBT30 toolingBT30 toolingBT30 tooling

Thank You: machine vice

Sun 23rd Feb '20

Advert ID: 37268

Details:
Advert Number: 37251
sold very quickly thanks to this brilliant site, thanks to everyone, money going for vet bills to treat sick and injured hedgehogs. thanks again.
Contact:
rob

Thank You: Sold quickly

Sat 22nd Feb '20

Advert ID: 37267

Details:
Advert Number: 37241
Excellent service, sold within 48 hours. Thanks staff.
Contact:
John

For Sale: Engineering Workshop Practice

Sat 22nd Feb '20

Advert ID: 37266

Books/Magazines
Details:
A 3 volume set of engineering books , pbbly late 40s or early 50s . Not immaculate but very good for 70 years plus ! Wish I was half as good for the same age ! Prefer collection please ,but will MyHermes at cost ..Please see the photos .
Terms:
Price: £20.00
Collection or Post
Contact:
bob
peterborough
PE2
UK
email
Engineering Workshop PracticeEngineering Workshop PracticeEngineering Workshop Practice


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

For Sale: Thread Cutting Oil

Sat 22nd Feb '20

Advert ID: 37265

Materials
Details:
I have some cans of Ridgid high performance thread cutting oil for sale. I believe this used with threading machines for steel hot water pipe installations but it works well enough on regular taps and dies. It is a very thin oil. Each can is new and unused and is 600ml. Expiry date is 05/2018 although I am not sure how it can go off.
Price is £4 per can.

Can be collected from south Nottingham, NG11 or I can post with MyHermes, price dependant on quantity.
Thanks for reading.
Terms:
Price: £4.00
Collection or Post
Contact:
Chris Green
Nottingham
UK
email
Thread Cutting OilThread Cutting Oil

For Sale: Slabbing cutter for horizontal mill

Sat 22nd Feb '20

Advert ID: 37264

Tools
Details:
Its a 3" dia, 6" long slabbing cutter with a 1" dia bore, with keyway. It doesn't seem to have seen much action, certainly I've never used it, and as I don't have a horizonal mill any more, its surplus to requirements.
Its marked '3x6x1 Star Cutter Co, Detroit, USA,' so definitely not a far eastern import. Will remove serious amounts of metal if you've got a mill man enough to drive it.

£25 collected from near Worcester, or plus postage at cost, probably about £7.
Terms:
Price: £25.00
Postage: £7.00
Collection or Post
Contact:
Richard Wilson
Worcester
WR7
UK
07913 849846
email
Slabbing cutter for horizontal millSlabbing cutter for horizontal mill

For Sale: Vertex HV6 Precision Rotary Table - Used twice

Sat 22nd Feb '20

Advert ID: 37263

Tools
Details:
Still clearing the items that constituted my late uncle's workshop. He was a toolmaker by trade.

About a year before he died at 92, he asked me to get him a rotary table (he didn't do "online"). So I got a new Vertex HV6 Precision Rotary Table. He used it for the two one-off jobs he had in mind for it, then after that it remained on his shelf in his dehumidified workshop.

So here it is now up for sale in as-new condition - no dings anywhere and no corrosion. It comes with the 3 T-nuts that he made for it - and also a 2MT/parallel shaft.

Diameter is 6 inches/150mm and centre-height when vertical is about 4 inches/100mm. Overall height when horizontal is about 85mm. It weighs about 12.5 Kgs.

Due to weight I would much prefer collection. Or I could drive out to nearby M4/M5 service stations to meet-up. I also travel up to the West Midlands quite often.
Terms:
Price: £125.00
Collection Only
Contact:
Peter Barker
Bristol
BS37
UK
email
Vertex HV6 Precision Rotary Table - Used twiceVertex HV6 Precision Rotary Table - Used twiceVertex HV6 Precision Rotary Table - Used twiceVertex HV6 Precision Rotary Table - Used twice

For Sale: Myford collets, with boxes

Sat 22nd Feb '20

Advert ID: 37262

Tools
Details:
A set of imperial Myford Collets, with closed tube, extractor, and nose piece, contained in two Myford boxes, together with 18 imperial collets, all in good condition, some unused. Sizes are 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 15/64, 1/4, 17/64, 19/64, 5/16, 21/64, 3/8, 25/64, 27/64, 7/16, 29/64, 1/2 inch.

They can be posted, signed for delivery for £10, or you can collect from near Norwich Norfolk
Terms:
Price: £300.00
Postage: £10.00
Collection or Post
Contact:
B Baker
Norwich
NR13
UK
01493754112
email
Myford collets, with boxesMyford collets, with boxesMyford collets, with boxes

Wanted: Myford Super 7 Tailstock Base.

Sat 22nd Feb '20

Advert ID: 37261

Machines
Details:
Does anyone have an unused/not worn Myford super 7 tailstock base that is surplus to requirements? Must be in excellent condition. It's a long shot but I know people sometimes buy these things but replace the machine before they get chance to replace the item they bought.
Contact:
Richard Hersey
Crewe
CW2
UK
01270 215695
email

Wanted: 4-5" and 5-6" 3 point bore mics

Fri 21st Feb '20

Advert ID: 37260

Measuring
See all ads from Kevin Slater
Details:
This is a bit of a long shot but you never know what you guys have lurking in the back of a cupboard!

I am looking for 3 point bore mics - preferably digital (I know how to read analogue, I just have problems seeing the scales!).

I need to measure a 5" bore at the moment so hopefully I only need a 4-5" but you never know - it might be oversized and therefore need the 5-6"!

Metric would also be fine!

Preferably with a setting ring.
Contact:
Kevin Slater
Chew Stoke
BS40
UK
01275331074
email
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...

For Sale: PCB High Speed Auto Drilling Machine #2

Fri 21st Feb '20

Advert ID: 37259

Tools
See all ads from Steve Murray
Details:
This is a Prima PCB Drilling Machine Mark 4. I have 2 of these machines, almost identical but with small differences, and this one is in slightly better condition.

It's a high speed (nominally 18,000 rpm) precision drilling machine for making the small holes for PCB components. The chuck will accept a drill bit up to 3.6mm or 1/8".

The adjustable nozzle is a built in vacuum cleaner which effectively sucks up the dust and keeps the drill bit clear. Also the fitted light illuminates the drill bit very well.

It has a very handy automatic mode which initiates both the drill and the vacuum as the lever is depressed, then turns them off when returned. Alternatively these functions can be turned on or off manually.
The drill easily makes very neat precise little holes in the old PCB I tested it on.

The drill has seen very little use. The table is a little marked but is very smooth.
I have a video of the machine in use to demonstrate it's functionality which I can send you on request.

I can post it to the UK mainland using Parcelforce for £11. Alternatively you can collect it or I may be able to deliver if it's mutually convenient
Terms:
Price: £135.00
Postage: £11.00
Collection, Delivery or Post
Contact:
Steve Murray
Prestatyn
LL18
UK
email
PCB High Speed Auto Drilling Machine #2PCB High Speed Auto Drilling Machine #2PCB High Speed Auto Drilling Machine #2PCB High Speed Auto Drilling Machine #2

For Sale: PCB High Speed Auto Drilling Machine #1

Fri 21st Feb '20

Advert ID: 37258

Tools
See all ads from Steve Murray
Details:
This is a Prima PCB Drilling Machine Mark 4. I have 2 of these machines, almost identical but with small differences, and one is in slightly better condition.

It's a high speed (nominally 18,000 rpm) precision drilling machine for making the small holes for PCB components. The chuck will accept a drill bit up to 3.6mm or 1/8".

The adjustable nozzle is a built in vacuum cleaner which effectively sucks up the dust and keeps the drill bit clear. Also the fitted light illuminates the drill bit very well.

It has a very handy automatic mode which initiates both the drill and the vacuum as the lever is depressed, then turns them off when returned. Alternatively these functions can be turned on or off manually.
The drill easily makes very neat precise little holes in the old PCB I tested it on.

The drill has seen very little use. The table is a little marked but is very smooth. There is a dent in the casing at the rear but this has no effect on functionality.
I have a video of the machine in use to demonstrate it's functionality which I can send you on request.

I can post it to the UK mainland using Parcelforce for £11. Alternatively you can collect it or I may be able to deliver if it's mutually convenient
Terms:
Price: £125.00
Postage: £11.00
Collection, Delivery or Post
Contact:
Steve Murray
Prestatyn
LL18
UK
email
PCB High Speed Auto Drilling Machine #1PCB High Speed Auto Drilling Machine #1PCB High Speed Auto Drilling Machine #1PCB High Speed Auto Drilling Machine #1

For Sale: Record 110 Heavy Duty Bench Vice with QR

Thu 20th Feb '20

Advert ID: 37257

Tools
Details:
Hi Everyone,
Record 110 heavy duty quick-release bench vice for sale as now surplus to requirements. I refurbished it about 2 years ago with replacement jaws made out of gauge plate. Always used with fibre grip inserts. Some scratches and signs of use.
Great vice - ready for decades of use.
Very heavy so collection only please.
Thanks,
Mark
Terms:
Price: £45.00
Collection Only
Contact:
Mark McKenzie
Northwich
CW8
UK
07711350552
email

For Sale: lorch watchmakers lathe

Thu 20th Feb '20

Advert ID: 37256

Machines
Details:
lorch lathe, great condition,3 jaw chuck, xslide, 16 collets, all the accessories in photo, motor light with transformer , indexed pully.
Terms:
Price: £425.00
Collection or Post
Contact:
john anderson
richmond , yorkshire
dl10
UK
07923417365
email
lorch watchmakers lathelorch watchmakers lathelorch watchmakers lathelorch watchmakers lathe

For Sale: Autolock chucks

Thu 20th Feb '20

Advert ID: 37252

Tools
Details:
2 Clarkson Autolock chucks, 2MT as photos. Can post but prefer collection as heavy item. all proceeds from sale to array4hogs hedgehog rescue.
Terms:
Price: £35.00
Collection Only
Contact:
rob
Birmingham
B13
UK
07786511143
Autolock chucksAutolock chucks

For Sale: Machine vice

Thu 20th Feb '20

Advert ID: 37251

Tools
Details:
4" machine vice as per photos, good condition, no marks on jaws, collection only as very heavy, all proceeds to array4hogs hedgehog rescue.
Terms:
Price: £40.00
Collection Only
Contact:
rob
Birmingham
b13
UK
07786511143
Machine viceMachine vice
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: Frenco Height Setting Gauge

Wed 19th Feb '20

Advert ID: 37248

Tools
See all ads from Steve Murray
Details:
This is a beautifully made height setting gauge in really excellent condition. It works very smoothly and shows very few signs of use.
This is a tool of exceptionally high quality. It's also very heavy, weighing in at over 17Kg.
Collection is therefore ideal but I'll post it if necessary with Parcelforce for £12. Or I'll pack it and you can arrange your own courier.
I may deliver it if you live close enough.
Terms:
Price: £60.00
Postage: £12.00
Collection, Delivery or Post
Contact:
Steve Murray
Prestatyn
LL18
UK
email
Frenco Height Setting GaugeFrenco Height Setting GaugeFrenco Height Setting GaugeFrenco Height Setting Gauge

For Sale: Benson Verniers Gear tooth caliper

Wed 19th Feb '20

Advert ID: 37247

Tools
See all ads from Steve Murray
Details:
This gear tooth caliper is made by Benson Verniers of Bradford. It has been little used and is in excellent condition. I've certainly never used it in the 10 years it has been in my drawer.
I'll post it for cost or you can collect it.
Terms:
Price: £45.00
Postage: £4.00
Collection, Delivery or Post
Contact:
Steve Murray
Prestatyn
LL18
UK
email
Benson Verniers Gear tooth caliperBenson Verniers Gear tooth caliperBenson Verniers Gear tooth caliperBenson Verniers Gear tooth caliper

For Sale: Harrison Universal Milling Machine

Wed 19th Feb '20

Advert ID: 37246

Machines
Details:
Vertical head 30 international
Horizontal overarm and bracket
Milling Arbour
Milling vice
Rotary table
Some 30 int tooling
3 Axis DRO with only 2 axis fitted, 3rd axis slide supplied not fitted
240 volts including power x feed motor
In good working order
Assistance can be given to load
Terms:
Price: £1,650.00
Collection Only
Contact:
John
Exeter
EX3
UK
01392875877
email
Harrison Universal Milling MachineHarrison Universal Milling Machine

For Sale: Colchester Bantam 1600 Lathe

Wed 19th Feb '20

Advert ID: 37245

Machines
Details:
Ser No AA7289
Metric
5” 3 J SC Chuck Bernard
6” 4 J independent Chuck Cushman
8” 4 J independent Chuck Bison ( new inbox )
8” 3 JSC TOS ( new in box )
Large Face plate with TEE slots
Standard Face plate
Dickson type tool post with 5 holders
3 - 2 morse adapter
Tailstock chuck
Two running centers standard and large
Fixed and traveling steadies
Rear toolpost
In very good working order running on a variable speed inverter drive, ( included ).
Assistance can be given to load
Terms:
Price: £1,700.00
Collection Only
Contact:
John
Exeter
EX3
UK
01392875877
email
Colchester Bantam 1600 LatheColchester Bantam 1600 LatheColchester Bantam 1600 Lathe

For Sale: Surface Plate etc Space making

Wed 19th Feb '20

Advert ID: 37244

Tools
Details:
"Crown" Surface plate 18x21 aprox with wheeled stand £100

Smiths Insts Comparator & DTI (metric) 0.02mm (0.0008") £40

Caliers Inside, Outside & Dividers £3 a pair

German "Micron" dial-vernier Caliper £5

"Capstan" DTI, 1-1/4" dia,
0.0005" x 1/4" stroke £5

BSW & BSF taps.
£2 each up to 3/8"
£5 each up to 5/8
£10 up to 1-1/2"
BA taps mostly even no's £1.50 ea

Some dies, £3 up to 3/8 email me with your needs

Imperial reamers
1/8" - 3/8" £2
3/8 - 5/8 £5
5/8 - 3/4" £8
Larger too, email me with your needs

Collection from Folkestone or Ashford Kent.
Small items postage/courier at cost
Terms:
Price: Multiple
Collection or Post
Contact:
Richard
Folkestone
CT18
UK
07985791947
email
Surface Plate etc Space makingSurface Plate etc Space makingSurface Plate etc Space makingSurface Plate etc Space making

Wanted: Burnerd Multisize MC or EC collets

Wed 19th Feb '20

Advert ID: 37243

Tools
Details:
Hi Everyone,
Looking for (hopefully a set of) Burnerd Multisize collets - either the earlier MC or later EC types.
If you just happen to have some available please get in touch.
Many thanks,
Mark
Contact:
Mark McKenzie
Northwich
CW8
UK
07711350552
email
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...

For Sale: Electric Motor

Wed 19th Feb '20

Advert ID: 37240

Tools
Details:
A Brook Motors Gryphon 3 phase electric motor. 940 r.p.m. , 1.36 FLA , 0.56 HP, 5/8" shaft with keyway. Lovely quiet smooth running motor. Has flex and 3 phase plug fitted.
Collection preferred as heavy.
Terms:
Price: £50.00
Collection Only
Contact:
Mike Smith
Brentwood
CM13
UK
email
Electric Motor

For Sale: Chuck jaws

Wed 19th Feb '20

Advert ID: 37239

Machines
See all ads from Dave Yates
Details:
Set of standard and reverse jaws to fit a Pratt Burnerd 8" 3j chuck. Standatd jaws have seen some use but still sound. Reverse jaws have seen little use. I have had both sets in the chuck on my Colchester, they are all tight with no sign of any slop. Both sets have storage marks/corrosion but this does not affect function. Price for both sets
Collection or I will send at cost
Terms:
Price: £45.00
Collection or Post
Contact:
Dave Yates
Coningsby
LN4
UK
email
Chuck jaws

Wanted: Schaublin 70 drawbar

Wed 19th Feb '20

Advert ID: 37238

Tools
Details:
Before I roll my sleeves up and make one, does anyone have a Schaublin 70 headstock drawbar for sale?
Also interested in any other bits if available.
Contact:
Matt Harrington
Nr Yeovil
BA22
UK
07831644447
email

For Sale: Reverse chuck jaws

Wed 19th Feb '20

Advert ID: 37237

Machines
See all ads from Dave Yates
Details:
Reverse chuck jaws to fit a largeish 3j chuck. I suspect something like a 10" Pratt Burnerd. These are to fit a 25mm slot. In excellent mechanical condition they look to have hade little or no use. Had them fo years but do not fit any of my chucks All have the serial no 30949
Collection or I will send at cost
Terms:
Price: £40.00
Collection or Post
Contact:
Dave Yates
Coningsby
LN4
UK
email
Reverse chuck jawsReverse chuck jaws

For Sale: Paschendale locomotive

Wed 19th Feb '20

Advert ID: 37236

Models
Details:
A large two and a half inch gauge Pacific (New Zealand railways) Locomotive, Needs some work to complete. By accident discovered it will run on air upsidedown! So this needs sorting, complete tender,Asking £950 o.v.n.o, but would also consider a part exchange for a small three and a half inch gauge loco cash either way?
Terms:
Price: £950.00
Postage: £25.00
Collection, Delivery or Post
Contact:
David Bothwell
Halifax
HX1
UK
01422256969
email
Paschendale locomotivePaschendale locomotive

For Sale: Ransome Simms Jeffries Traction Engine

Wed 19th Feb '20

Advert ID: 37235

Models
Details:
Part built Ransome Simms and Jeffries twin cylinder 2" scale, Work done is smokebox, chimney side plates, cylinders bored, pump fitted, New boiler which comes with an expired certificate,boiler never used, set of drawings, also most gears and various castings including sets of lamp castings front and rear, rubber tyre material, In total over £1300 spent, asking a very reasonable £750 worth pointing out only one (completed) rear wheel present, and castings for front present
Terms:
Price: £750.00
Postage: £25.00
Collection, Delivery or Post
Contact:
David Bothwell
HALIFAX
HX1
UK
01422256969
email
Ransome Simms Jeffries Traction EngineRansome Simms Jeffries Traction EngineRansome Simms Jeffries Traction Engine
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

Wanted: 5C collets adaptor

Wed 19th Feb '20

Advert ID: 37234

Machines
Details:
Looking for a 5C collet adaptor to fit the spindle nose taper of a Colchester Master 2500. Similar to the one on the right in the pic. Cash or a swap with the one on the left which fits a Colchester Triumph 2000 and is not needed.
Contact:
Neil Mckillop
Reading
RG7
UK
07808 432559
email
5C collets adaptor

Wanted: copper or brass tube

Tue 18th Feb '20

Advert ID: 37230

Materials
Details:
I am looking for a short length of thin wall copper or brass tube around 6" long 21/2 diameter if any one has a piece going spare
Contact:
tony
BRADFORD
BD4 0SR
UK
01274687130

Wanted: Castings Stuart no 4 vertical engine

Tue 18th Feb '20

Advert ID: 37228

Materials
Details:
Looking for any spare castings for the Stuart number 4 vertical engine.
Contact:
Phil Bridgway
Newport
np44
UK
01633873584
email

For Sale: Clarke 1 Ton Folding Engine Lift

Tue 18th Feb '20

Advert ID: 37214

Machines
Details:
Clarke Engine Hoist In good condition, very little use.
Buyer collects it would fit in an estate car.
Terms:
Price: £85.00
Collection Only
Contact:
John
Exeter
EX3
UK
01392875877
email
Clarke 1 Ton Folding Engine LiftClarke 1 Ton Folding Engine Lift

For Sale: Excel L3N Precision Lathe.

Tue 18th Feb '20

Advert ID: 37225

Machines
See all ads from Paul Robbins
Details:
4in center hight x12.5 between centers.
It has:Screw feed compound slide unit.
2mt tailstock
Bed mounted 6 station Capstan unit
Capstan has roller boxes die box drill
chuck ect.
A bed mounted cut off slide
A hand turning rest. 3jaw chuck.
4jaw chuck.An ER32 collet chuck,plenty
of collets.A face plate.2station toolpost
The headstock bearings have been reset
and run in.A compleatly new drive unit
is fitted.A.75hp motor 3phase,inverter
driven,so 240v imput,100-2000+rpm.
36 Hole direct dividing headstock pulley
The whole mounted on a cast iron stand.
See tony griffiths "lathes" for full
discription.This is a 1950s machine can
be taken apart for transport.
Weight about 350lbs?
C'nt load pics onto site, got lots.
Terms:
Price: £470.00
Collection Only
Contact:
Paul Robbins
Peterborough
PE1
UK
email

For Sale: Allbrit Planimeter

Tue 18th Feb '20

Advert ID: 37224

Tools
Details:
Vintage Allbrit Planimeter serial Number 43789 in very nice condition seen very little use if any.
Terms:
Price: £55.00
Postage: £5.00
Collection or Post
Contact:
Andrew Lewis
Tenby
SA70
UK
07788944581
email
Allbrit PlanimeterAllbrit PlanimeterAllbrit PlanimeterAllbrit Planimeter


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

For Sale: Reel of coated copper wire

Mon 17th Feb '20

Advert ID: 37222

Materials
Details:
I have a 4.5 kilo reel of .45 thickness coated copper wire £10 plus postage at cost. also due to reduction in man habitat I have the following lengths of box stainless steel: all 3,5 mm 100x50x1.7m, 40x40x1.5m 30f, 40x40x2m,30x50x1.7m £20 too heavy to post, plus all the spare lengths of tube and other metals I must dispose of free but you must take it all. More to follow!
Terms:
Price: Multiple
Collection Only
Contact:
Brian Yates
Peterborough
PE9
UK
01780740833
email

For Sale: Gun Cabinet

Mon 17th Feb '20

Advert ID: 37221

General
Details:
Steel three gun cabinet in very good 'like new' condition. Colour grey hammer.

Size: 127cm high x 22 cm wide x 20cm deep.

Ideal for storing your long drills, collection of antique lead screws or you could even keep a rifle/shotgun in it.

A heavy item, so needs to be collected.
Terms:
Price: £85.00
Collection Only
Contact:
Malcolm Halford
TIDWORTH
SP9 7YE
UK
mach.1@sky.com
email
Gun CabinetGun Cabinet

For Sale: Cutting torch and soldering iron

Sun 16th Feb '20

Advert ID: 37219

Tools
Details:
Tools I am selling on behalf of a widow.
Old Oxt/acet cutting torch, comes with 2 spare nozzles ,one is marked WESCOL ANM 3/64 and looks like its brand new , never been fitted. Also you get a nice little electrical soldering iron with a spare sharp point end and a little wire stand that unfolds to rest it on.Ive tested the soldering iron and it heats up properly as it should.
Can be collected from near Westerham Kent or sent courier for £7.00
Terms:
Price: £20.00
Postage: £7.00
Collection or Post
Contact:
Paul Watson
Westerham
TN16
UK
01959 541038
email
Cutting torch and soldering ironCutting torch and soldering ironCutting torch and soldering ironCutting torch and soldering iron

For Sale: Record Stillsons three pairs

Sun 16th Feb '20

Advert ID: 37218

Tools
Details:
Tools I am selling on behalf of a widow.
Job lot , three pairs of Record Stillsons.
Theres a 14" an 18" and a 24".
All the jaws look to be in excellant condition. I dont think they have done much work at all if any.
I would like to sell all three together if possible ,so price is for all three.
Can be collected from near Westerham Kent or boxed and sent by courier for £8-00 as they make a heavy lot.
Terms:
Price: £45.00
Postage: £8.00
Collection or Post
Contact:
Paul Watson
Westerham
TN16
UK
01959 541038
email
Record Stillsons three pairsRecord Stillsons three pairsRecord Stillsons three pairsRecord Stillsons three pairs

For Sale: Ajax milling machine Free

Sun 16th Feb '20

Advert ID: 37217

Machines
Details:
Ajax horizontal milling machine project,may need motor sorting or replacing and guard making for drive belt.Free to collect but please make a small donation to British Heart Foundation
Terms:
Price: Free
Collection Only
Contact:
Kevin
Hull
HU5
UK
01482446499
email
Ajax milling machine FreeAjax milling machine Free

For Sale: Lathe chuck guard

Sun 16th Feb '20

Advert ID: 37216

Tools
See all ads from Dave Yates
Details:
Found another one!
This, as I recall, is off a Boxford, it will not fit a Myford with a clutch, it fouls the lever when raised. Needs a 5/8" dia bar to pivot on. Perspex is a bit scratched but visibility quite good.
Collection or I will send at cost
Terms:
Price: £20.00
Collection or Post
Contact:
Dave Yates
Coningsby
LN4
UK
email
Lathe chuck guardLathe chuck guard
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...

For Sale: Surface Plate

Sun 16th Feb '20

Advert ID: 37215

Tools
See all ads from Dave Yates
Details:
3ft x 2ft cast iron surface plate on stand. Bought it a few years ago for checking the alignment on bicycle frames, now surplus to requirements. Its in good condition, a few marks but nothing that affects accuracy. Welded angle iron stand with a shelf for accessories and a rather raggy plywood cover
Definitely collection as it is very heavy
Terms:
Price: £200.00
Collection Only
Contact:
Dave Yates
Coningsby
LN4
UK
email
Surface PlateSurface Plate

For Sale: Taylor Hobson Pantograph Engraver with Accesories

Sun 16th Feb '20

Advert ID: 37213

Machines
Details:
Taylor Hobson Pantograph Engraver with Accesories, including David Brown bench top engraver and Newall grinder. Will require a service and test not used for a few years but all motors in working order, loads of letters, tools, vice,equipment. Can email more photos if required.
Terms:
Price: £300.00
Collection Only
Contact:
Kevin
Hull
HU5
UK
01482446499
email
Taylor Hobson Pantograph Engraver with AccesoriesTaylor Hobson Pantograph Engraver with AccesoriesTaylor Hobson Pantograph Engraver with Accesories

For Sale: Small Neat Vice for Workholding of Tiny Parts

Sun 16th Feb '20

Advert ID: 37212

Tools
Details:
This small vice is nicely designed for the work holding of small parts - or even jewellery perhaps. There is zero slop in the thread.

Dimensions:
90mm long (not counting handle), 60mm wide.
35mm max jaw opening.
50mm jaw length.
33mm high.
45mm between centres of holding-down slots.

Yours for £15 - and that includes the Small Parcel 2nd Class Post.
Terms:
Price: £15.00
Postage: Free
Post Only
Contact:
Peter Barker
Bristol
BS37
UK
07779 329060
email
Small Neat Vice for Workholding of Tiny PartsSmall Neat Vice for Workholding of Tiny PartsSmall Neat Vice for Workholding of Tiny Parts

For Sale: Flexbar Milling Machine Shield (Bridgeport)

Sun 16th Feb '20

Advert ID: 37211

General
Details:
Sorry for the poor quality pics. This item consists of a steel channel that mounts on top of the Bridgeport ram using the 3/4" UNC threaded hole for the lifting eyebolt. The other end of the channel has a mounting bracket with lockable knob. The 1" diameter 30" long extension tube is retractable in the socket of this mounting bracket so that it can be set for the ideal positioning of the shield. The shield itself (16"W x 8"H) is made from unbreakable lexan and is attached to a Flexbar arm so you can quickly position it exactly where it is needed. There is also a spare lexan shield (16"W x 16"H). I bought this direct from flexbar.com in the USA several years ago but I've never used it.
Terms:
Price: £75.00
Postage: £12.00
Collection or Post
Contact:
Christian Engl
Derby
DE21
UK
email
Flexbar Milling Machine Shield (Bridgeport)Flexbar Milling Machine Shield (Bridgeport)Flexbar Milling Machine Shield (Bridgeport)

Wanted: 1 3/8" dia. Silver steel bar end or offcut.

Sun 16th Feb '20

Advert ID: 37210

Materials
Details:
As silver steel is expensive in the larger diameters and longer lengths just looking for an off cut 13/8" diameter approx. about 2" or 3" long needed for a repair I am doing.
Contact:
Richard Hersey
Crewe
UK
01270 215695
email

For Sale: Large Oil Lubricators for Machinery

Sun 16th Feb '20

Advert ID: 37209

General
Details:
I have two fairly large lubricators for mounting on critical lubrication points on a wide variety of machinery and machine tools. They are non-magnetic and heavy - so presumably chromed brass - except for the spring-loaded lid which is chromed steel. The dia of the body is 7/8" and the lid is 1". The overall height, including the 1/4 BSP male thread, is 1-5/8 inches.

The engraving on the lid reads: Partridge's No.20 PAT 28068. They each need a new thin strip of felt (or absorbent string?) before putting them to work.

Cost £20 the pair - and that includes Small Parcel 2nd Class postage.
Terms:
Price: £20.00
Postage: Free
Post Only
Contact:
Peter Barker
Bristol
BS37
UK
07779 329060
email
Large Oil Lubricators for MachineryLarge Oil Lubricators for Machinery
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: Floating Tool Holders

Sun 16th Feb '20

Advert ID: 37208

Tools
Details:
4 Morse Taper (male and female) - £40
2 Morse Taper (male and female) 2 off - £40 each
2 Morse Taper with 1 Morse female - £40
Terms:
Price: £160.00
Collection Only
Contact:
Dave Akhurst
Tonbridge
TN11
UK
01892740572
email
Floating Tool HoldersFloating Tool Holders

Information: Coolant Anti-Bacterial?

Sun 16th Feb '20

Advert ID: 37207

General
Details:
Could anyone recommend a reasonably priced effective anti-bacterial additive for the coolant reservoir, please?

The sort of stuff that prevents, or at least delays, the formation of the black gunge that accumulates when the coolant is left standing for any length of time. I understand this is due to bacteria but I stand to be corrected. The residue seems to readily form in the cheap soluble oil I use as a coolant. Sadly, I cannot justify the use of higher quality coolants which may resist this accumulation as the machines are only in an amateur's workshop and infrequently used.

It would also be helpful to have the name of a supplier or distributor of the said product.

Many thanks.
Contact:
Chris Crew
UK
07799098660
email

Wanted: Jones & Shipman Wheel Balancer

Sat 15th Feb '20

Advert ID: 37205

Tools
Details:
Looking for a Jones & Shipman Wheel Balancer in good condition.

Hopefully someone has one thats gathering dust which I can buy for good cash.

Many thanks in anticipation.
Contact:
John
Beccles
NR34
UK
email

For Sale: SWP Oxy-propane bottle trolley

Sat 15th Feb '20

Advert ID: 37203

Tools
Details:
I have this SWP Oxy-propane bottle trolley for sale as its far too big for my small bottles. The model number is SWP 1268.

It's pretty much as new having sat in my workshop from new.

Collection preferred but if you buy it you are welcome to arrange a courier to collect. Can also deliver locally.
Terms:
Price: £40.00
Collection or Delivery
Contact:
Scott Gray
Cupar
KY15
UK
email
SWP Oxy-propane bottle trolleySWP Oxy-propane bottle trolley

For Sale: Record No 23 Quick Action Vice

Sat 15th Feb '20

Advert ID: 37200

Tools
Details:
41/2" Fitter's vice.

Collection or can determine delivery cost for your location.
Terms:
Price: £45.00
Collection or Delivery
Contact:
Ian
Warrington
WA6
UK
email
Record No 23 Quick Action ViceRecord No 23 Quick Action Vice

For Sale: Lathe chuck guard

Sat 15th Feb '20

Advert ID: 37197

Machines
Details:
Chuck guard for Colchester Bantam, new unused. Can easily be adapted for other makes as per photo.£75. Buyer collects.
Terms:
Price: £75.00
Collection Only
Contact:
Bernie
Colchester
co6
UK
07748265425
Lathe chuck guardLathe chuck guardLathe chuck guardLathe chuck guard
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...

For Sale: Hydraulic portable power pack

Sat 15th Feb '20

Advert ID: 37196

Machines
Details:
MHS Hydraulic portable power pack,single phase.3 hp260 psi6 Ltr/ min. 45 Ltr res.( full) sight gauge. Complete with pipes. Very little used,excellent working condition. £925. Buyer collects.
Terms:
Price: £925.00
Collection Only
Contact:
Bernie
Colchester
co6
UK
07748265425
Hydraulic portable power packHydraulic portable power packHydraulic portable power packHydraulic portable power pack

For Sale: Milling machine guard.

Sat 15th Feb '20

Advert ID: 37195

Machines
Details:
Milling machine table guard Max A Just. Brand new. £ 175-0-0. Buyer collects . Phone 07748265425.
Terms:
Price: £175.00
Collection Only
Contact:
Bernie
Colchester
co6
UK
07748265425
Milling machine guard.Milling machine guard.Milling machine guard.Milling machine guard.

Wanted: Stepper motors and drivers

Fri 14th Feb '20

Advert ID: 37193

CNC
See all ads from Andy Evans
Details:
Looking for decent quality stepper motors, ideally NEMA 34 and drivers. It's a long shot but if you have a Centroid Acorn let me know. Thanks
Contact:
Andy Evans
York
YO30
UK
email

For Sale: castings for 5" or 7 1/4" bogies

Fri 14th Feb '20

Advert ID: 37192

General
Details:
a set of aluminium castings to construct a pair of bogie frames for heavy duty in 5" gauge,or lighter duty in 71/4" price
£40 for the set of 4 . Can be posted at extra cost
Terms:
Price: £40.00
Collection or Post
Contact:
Alan
Kendal
LA8
UK
email
castings for 5" or 7 1/4" bogiescastings for 5" or 7 1/4" bogies

Wanted: boxford lathe

Fri 14th Feb '20

Advert ID: 37188

Machines
Details:
Hi
Has anyone have a set of boxford change gears lathe is late 1950 price please
Contact:
david richardson
spondon
de217ey
UK
david.richardson240@ntlworld.com
email

For Sale: Nikken R8 milling chuck

Fri 14th Feb '20

Advert ID: 37186

Tools
Details:
Nikken R87/16" chuck with collets M6 X2, M8, M10, M16 X2, 1/4", 3/8", 1/2", 5/8", all in very good order. Price includes fully insured delivery by Hermes.
Terms:
Price: £85.00
Postage: Free
Collection or Delivery
Contact:
Jeff
Lincoln
LN4
UK
email
Nikken R8 milling chuckNikken R8 milling chuckNikken R8 milling chuck


Disclaimer

Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.

By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.

We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.

In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.

We do not sell, hire, share or give out your email address.

The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.

So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new  and repeat visitors. It does not have any detail on who you are.

Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.

All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.

This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales. 

 

Donate

Want to help us fund the site and time spent by the people behind it then use the button below.

We are not a registered charity so you can't claim it back but it helps pay for the costs of running the site and improving the features.

You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.