Jurassic Tools Ebay shop here:--https://www.ebay.c... Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. ...
Want to help us fund the site and time spent by the people behind it then use the button below.
We are not a registered charity so you can't claim it back but it helps pay for the costs of running the site and improving the features.
You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.
We have 13 adverts and 2 completed so far in December 2025 7 For sale adverts and of these 1 have sold. 4 Wanted adverts and of these none found what they needed. 1 Information adverts and 1 Thank you posts.
Last approved: Wednesday 10th December 2025 at 23:06 Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: A Coronet Tool company "Classic 10" Bandsaw. Originally fitted too and powered by the Coronet woodturning Lathe, but can be bench fitted and use a stand alone motor, It is in great shape and has been stored unused for over twenty years. If you want any further images or details please ask. I am looking for £150 cash on collection and I might be able to find a motor to sweeten the deal.
Details: In good working order, It comes with original 3 jaw chuck an unused 4 jaw independent chuck but no key for it, a vertical milling/drilling post. It has a 0 to 4mm Jacobs chuck with key, a faceplate two fixed centres and two rods for the 3 jaw, new drive belts, it has a blank 30mm dia bar threaded 12 x 1 mm to make into a live centre with bearings. I have replaced the main head bearings and spring washers, also replaced the shaft and two bearings in the intermediate driven pulley, I have put in bearing washers on each axis screws and tailstock replaced the plastic three hand wheels on this lathe, made with this lathe. It has done some nice fine work replacing worn out parts on two clocks. The only reason I am parting with it, I now have the Unimat 3 with power feed and a DC variable speed motor. I am thinking £295 OVNO cash on collection or could be boxed up and courier delivery extra.
Terms: Price: £295.00 Courier: £20.00 Collection or Courier/Delivery
Details: I have a horizontal mill that has an MT5 shaft and I'm looking for MT4 or MT3 drive milling arbour with at least 10 inches in length and 0.75 or 1 inch diameter. Machine is a Thiel. Regards Ian
Details: Brand new Sieg SX3 milling machine and stand. Unused. I still have the transport case. Also includes brand new R8 Face mill and inserts, slitting saw arbor, clamp set and ER25 collet chuck and spanner. Collection from SN4 area.
Details: Advert Number: 44921 Hi All, thanks for all the suggestions. The winner is that a 9.5mm reamer is exactly 0.3470 which is the exact size I was looking for. I had considered metric reamers but only in unitary sizes (8,9,etc).
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: I am currently trying to build a set of Stuart Turner plans up as a library. Does anyone have any available? Would also be interested in any parts and models
Contact: Marc Fenner HEATHFIELD TN21 UK +447793009668
Models Project Build (Major parts may still need building
Details: The 'Mastiff' 4-cyliner 25cc petrol engine as made as a 'break' from larger, normally steam-related work. The design is by LC Mason, a well-known contributor to the model engineering world. At 82, I need to thin down a lot of items. The engine is in a flat four configuration. Bores are 3/4" 7/8" stroke. The work done is of the highest quality. crankshaft is finished, as are its crankcase bearings crankcase, machined from solid is largely complete. conn-rods and flywheel are finished. timing gears are complete. Valves part-finished cylinder head part machined with cylinder liners fitted. There are loads of material there to complete. The is a full set of 'Model Engineer' articles that cover construction Proceeds of sale to be donated to local food-bank and 'Home Workshop'. Asking for best offers over £250. Prefer collection because of weight. North Staffs. address. Thanks.
Terms: Price: Multiple Collection Only
Contact: Stuart Daw Newcastle-u-Lyme ST5 UK 01782767587
Details: Raglan little John lathe 51/2" swing over bed 11" diameter 24" between centres 13A plug with Inverter driving a 3 phase motor variable speed DRO 2 axis No 2 MT taper in tail stock 1" bore through head stock spindle Norton style gearbox for feed and screwcutting, feed lateral and transverse 3 & 4 jaw chucks, face plate, travelling steady, and parting, facing fixture Length 54" depth 23" height 59" Asking £600 Ono This lathe was used to build a 4" Ruston and Proctor traction engine but was school or college before so not much wear at all
Terms: Price: £600.00 Collection Only
Contact: David Rogerson Barrow-upon-Humber DN19 UK 01469530214
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: Does anyone happen to have a holddown finger for a Harvey Butterfly filing machine - or a scrap machine to act as a donor? The key requirements seem to be that it fits on a 15/16" post and has a copper or bronze tip. Pictures are attached of a complete machine (grey, from the internet), the similar roller finger (green, which I have) and the drawings of the missing parts. Many thanks in advance!
Contact: Richard Stuart Corsham SN13 UK 0791733500
Machines (Large Tooling) Refurbished (Working but repaired)
Details: This is a 1958 Boxford lathe fitted with a BUD saddle and lead screw so can do power feed on the cross slide as well as along the bed separately from the lead screw nuts. So it has the full spec of a BUD model Boxford. The original lathe was 1958 and its V belt drive with 16 spindle speeds from 38 to 1300 RPM. The bed is in good order and I was impressed by its accurate when using it. It has a 41/2" swing and a no2 morse taper in the tailstock. There is a full set of imperial change wheels. Some of these gears have a bit of rust showing but all are usable. It also comes with a 4" 3jaw chuck with both sets of jaws. This runs dead true and all edges on all the jaws are mint and not damaged. There are two small notches on the chucks front corner on the body but these are not near the jaws slots and don’t affect its working. There’s a 5" 4jaw independent chuck as new which may have never done a job its so clean and tight. There’s a 71/2" faceplate. There’s a genuine Jacobs 1/2" capacity tailstock chuck with perfect jaws and action and a key to suit it. There’s a new boxed live centre made in Poland and a dead centre plus a no2 to no1 morse taper adaptor. The motor fitted is a single phase British one and the whole lathe is refurbished, repainted and tested. The base drip tray is 48" long by 20" deep. Collection from near Westerham Kent ideally but delivery may be available and arranged when a sale is agreed.
Terms: Price: £575.00 Collection Only
Contact: Paul Watson Westerham TN16 UK 07763027597
Details: Union Graduate bowl turning wood lathe single phase variable speed thou an inverter. Faceplate dia 500mm columns with a specify made tool support, and tool rest
Details: Well equipped and in very good mechanical order. On original stand, just three bolts to remove from stand if needed for transportation. Three phase motor running through a VFD, so runs from normal 240v single phase house mains. Very good mechanical lathe speed control using the original Raglan variable pulley as well as infinite speeds from the VFD. Collection only and suitable van, pick up or trailer would be needed to collect. A very reluctant sale due to lack of space as I have bought a larger lathe. It has always produced excellent work.
Terms: Price: £975.00 Collection Only
Contact: Stuart Mawby Bradford BD13 UK 07985367528
Details: I have had this for a couple years,it has only been used a few of times and then put in the garage. It is single phase and has a 400KG capacity, it comes with fixing brackets also included is a boxed lifting frame that can be used to remove car engines ect but it is no longer wanted. Due to the weight collection only please.
Terms: Price: £100.00 Collection Only
Contact: Graham Gardner Gloucester GL51 UK 01242 580548 + 07870900332
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: Pressure gauge that came from a late friends estate but is not wanted. It is in good condition but tarnished due to storage i think. It is flange mounted and comes with a couple of fittings.
Terms: Price: £50.00 Postage: £3.99 Collection or Royal Mail
Contact: Graham Gardner Gloucester GL51 UK 01242 580548 + 07870900332
Details: Brazed carbide tipped 12 batches, and HSS, 11 Batches of lathe tools Various sizes and quantities. Available in my Ebay shop Click the link above in my Homeworkshop Business advert "Jurassic Tools" to go to my Ebay shop Enter "Brazed Carbide Lathe tools" or "HSS Lathe tools" in the shop "search" box to view detailed info. Contact me here with requirements. Prices will be 15% lower than shown. Pics here show 4 samples. Free postage to UK mainland addresses
Terms: Price: Multiple Postage: Free Collection, Courier/Delivery or Royal Mail
Contact: Trader Tony English Wareham BH20 UK 01929 473901
Materials (Consumable) Old Stock (New but storage spoil)
Details: Taper boiler barrel that came from a freinds estate but is not wanted, he made many excellent locomotives. It is 153/4 inches long, 3/32 thick, 5 inches dia at the large end and 41/2 inches diameter at the small end. The seam has been TIG welded and is in good condition.
Terms: Price: £60.00 Courier: £6.26 Collection or Courier/Delivery
Contact: Graham Gardner Gloucester GL51 UK 01242 580548 + 07870900332
Tools & Parts (Small tooling) Used (Correct working)
Details: Potts drill grinding jig as featured in the Model Engineer magazine in the 1920s. Hemingway, are still listing kits to make them. This one was made some years ago by a professional engineer and passed to me before he passed away. Unfortunately, I have no use for it.
Terms: Price: £30.00 Courier: Free Postage: £4.00 Collection or Royal Mail
Contact: Brian Merrifield Poole BH15 UK 07977912484
Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.
By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.
We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.
In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.
We do not sell, hire, share or give out your email address.
The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.
So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new and repeat visitors. It does not have any detail on who you are.
Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.
All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.
This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales.
All Ads
Wed 10th Dec '25 
