Trade Adverts

I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea. Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact details. ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours alloys using the lost wax process, ideal for the model engineer and restorer. Any enquiries and more details can be found on my web site. www.abbeycasting.c......
Read more...
Call Steve Cox on 07836 736496 or email for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using flatbed Transit with rear mounted…
Read more...
...
STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.

We also make other…
Read more...
Jurassic Tools here:-- https://www.jurass... Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. ...
Read more...
Home Workshop

defaultAll Adsrss

We have 151 adverts and 27 completed so far in October 2019
131 For sale adverts and of these 24 have sold.
13 Wanted adverts and of these 3 found what they needed.
4 Information adverts and 3 Thank you posts.


Last approved: Tuesday 22nd October 2019 at 22:01
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking

I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Harrison L5 lathe parts.

Sun 13th Oct '19

Advert ID: 36401

Machines
See all ads from Roger Kerry
Details:
Harrison L5 head stock gear selector..£20

Harrison L5 speed levers & selectors..£30

Harrison L5 feed screw bearing block..£20

Harrison L5 lathe power feed forward / reverse lever with mechanism.
Good condition, the main shaft has some ware as shown in pics..£30

Can post at cost
Terms:
Price: £30.00
Collection or Post
Contact:
Roger Kerry
chesterfield
s41
UK
email
Harrison L5 lathe parts.Harrison L5 lathe parts.Harrison L5 lathe parts.Harrison L5 lathe parts.

For Sale: Eclipse Scriber

Sun 13th Oct '19

Advert ID: 36400

Tools
Details:
Another item from my deceased friend’s workshop clearance.

Eclipse pocket scriber with reversible point. Model 220. Good condition apart from some very minor corrosion near clip (see photo). £8.

Collect from Romsey Hants or will send for postage cost.
Terms:
Price: £8.00
Collection or Post
Contact:
Mike
Romsey
SO51
UK
email
Eclipse ScriberEclipse Scriber

For Sale: Lathe tailstock spares or repair 4.5" center height approx.

Sun 13th Oct '19

Advert ID: 36397

Machines
See all ads from Roger Kerry
Details:
Lathe tailstock unknown make, approx 4.5" center height.

Spares or repair..?

could post at cost.
Terms:
Price: £35.00
Collection or Post
Contact:
Roger Kerry
chesterfield
s41
UK
email
Lathe tailstock spares or repair 4.5" center height approx.Lathe tailstock spares or repair 4.5" center height approx.Lathe tailstock spares or repair 4.5" center height approx.

For Sale: Taylor Hobson tool & cutter grinder

Sun 13th Oct '19

Advert ID: 36396

Machines
See all ads from Roger Kerry
Details:
Taylor Hobson tool & cutter grinder in excellent condition, with single phase motor on a standard 3 pin plug.

Cash on collection

could post at cost, but its extremely heavy for its size.
Terms:
Price: £245.00
Collection Only
Contact:
Roger Kerry
chesterfield
s41
UK
07931 173661
Taylor Hobson tool & cutter grinderTaylor Hobson tool & cutter grinderTaylor Hobson tool & cutter grinder

For Sale: Eclipse magnetic stand and Baty dial gauge

Sun 13th Oct '19

Advert ID: 36395

Tools
Details:
Two more items from my deceased friend’s workshop clearance

Eclipse model 902 magnetic dial gauge stand in fitted wooden box. Very nice heavy duty versatile stand with fine adjustment feature. Good condition. £40.

Baty metric dial gauge. Model C4. 21/4 inch diameter. .002 mm divisions. 0-50-0 graduation. 5mm range. Good condition in original box. £20.

Collect from Romsey Hants, or will send for postage cost.
Terms:
Price: Multiple
Collection or Post
Contact:
Mike
Romsey
SO51
UK
email
Eclipse magnetic stand and Baty dial gaugeEclipse magnetic stand and Baty dial gaugeEclipse magnetic stand and Baty dial gauge

For Sale: Lathe, Alpine TD-5AH metal lathe 36" centres.

Sun 13th Oct '19

Advert ID: 36394

Machines
See all ads from Roger Kerry
Details:
ALPINE metal lathe for sale, model TD - 5AH

A highly specked lathe with 36" between centers, screw cut gearbox, power feed compound & cross slide, forward & reverse motor with 6 speeds 75 - 1100 rpm & back gear, induction hardened bedways

single phase 1HP motor, on 13amp plug

swing over bed 10"
Swing over saddle 5"
Hole through spindle 13/8"

A very good capacity lathe in all aspects, that isn't supper heavy or take a large portion of your workshop.

Comes with lathe manual

Cash on collection

Any more information please ask..
Terms:
Price: £1,600.00
Collection Only
Contact:
Roger Kerry
chesterfield
s41
UK
email
Lathe, Alpine TD-5AH metal lathe 36" centres.Lathe, Alpine TD-5AH metal lathe 36" centres.Lathe, Alpine TD-5AH metal lathe 36" centres.Lathe, Alpine TD-5AH metal lathe 36" centres.


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

For Sale: Myford Items

Sun 13th Oct '19

Advert ID: 36393

Tools
Details:
More from my deceased friend’s workshop.

Various Myford items.

1. A pair of original ML7 or ML10 crosslide/topslde dials. Good condition. £15.

2. Small angle plate. Marked MA70. £12

3. Small milling vice to suit vertical slide etc. Good condition/no witness marks. £30

4. Tailstock handwheel. ML7/ML10. My friend replaced this because the groove for the keep plate was worn, giving more backlash than he was happy with. Otherwise in good condition with good chrome. £20.

Collection from Romsey Hants, or will send for the cost of the postage.
Terms:
Price: Multiple
Collection or Post
Contact:
Mike
Romsey
UK
email
Myford ItemsMyford ItemsMyford ItemsMyford Items

For Sale: Large Milling Cutters

Sun 13th Oct '19

Advert ID: 36392

Tools
Details:
More items from my deceased friends’s workshop.

A collection of very large milling cutters. All in good condition with no chips or damage to cutting edges. Very sharp.

1.Clarkson T slot cutter. 2 inch diameter/1inch wide cutting head. 32 mm shank. HSS

2. J&L edge rounding cutter. 0.4 inch radius. 25mm shank. HSS.

3. 25 mm diameter 4 flute milling cutter. Carbide cutting edges. 1 inch shank.

4. 22mm diameter Clarkson 6 flute milling cutter. Carbide cutting edges. 25 mm shank.

5. 1 inch diameter 2 flute slot drill. Helical carbide cutting edges. 1 inch shank.

All priced at £15 each, or £60 for the lot.

Collect from Romsey Hants, or will send for the cost of the postage.
Terms:
Price: £15.00
Collection or Post
Contact:
Mike
Romsey
SO51
UK
email
Large Milling CuttersLarge Milling Cutters

For Sale: Myford ML7

Sat 12th Oct '19

Advert ID: 36390

Machines
See all ads from Bill Harrison
Details:
Abandoned project.
Complete lathe with 3 and 4 jaw chucks, change gears and vertical table.
Lathe bed has been reground by Slideways of Nuneaton

Free delivery within 50 mile radius of NG104ES

Bill Harrison

mobile 07565998188
Terms:
Price: £650.00
Collection or Delivery
Contact:
Bill Harrison
Long Eaton
NG10
UK
07565998188
email
Myford ML7Myford ML7Myford ML7Myford ML7

For Sale: Engineering/ Model Engineering Books

Sat 12th Oct '19

Advert ID: 36388

Books/Magazines
Details:
Machinery's Handbook, 12th edn. 1944, good condition ... £15

Machinery's Handbook, 16th edn. 1962, v good condition ... £28

Myford ML 10 Lathe Manual, hard back with sleeve, excl. cond'n. rare ... £25

Myford ML7 Lathe Manual, hard back, no sleeve, excellent cond'n. rare ... £28

Myford ML7 Lathe Manual, soft back, v good condition, rare ... £22

Model Locomotive Boilermaking, Alec Farmer, softback, v good cond'n rare ... £23

Model Boilers & Boilermaking, K N Harris, hard back with sleeve, v good cond'n ... £14

Manual of Model Loco Construction, M Evans, hard back with sleeve, good cond'n ... £8

LBSC's Shop Shed & Road, M Evans, hard back with sleeve, v good condition ... £14

LBSC's Shop Shed & Road, M Evans, soft back, v good condition ... £10

Model Loco Building (Tich) LBSC, hard back with sleeve, good condition ... £22

Build Your Own Steam Loco (Sweet Pea), J Buckler, soft back, v good condition ... £9

All above plus postage, or collect from M Eng. show on THURSDAY
Terms:
Price: Multiple
Collection, Delivery or Post
Contact:
Colin
Derby
UK
email

For Sale: Harrison universal mill

Sat 12th Oct '19

Advert ID: 36387

Machines
See all ads from Mike Mortmer
Details:
Harrison universal mill 3 phase machine in good working order , full set of feed gearchange gears only removed from my workshop as I no longer use it I now have a larger mill. Has the overarm and two supports plus arbour bars and a few tools, splash guards, This machine can be run from a static inverter as it has a clutch so no motor stop/start all the time. Full spec can be seen on Lathes.co.uk delivery possible if not the end of the earth , Machine is available to view at Marlborough wilts anytime by arrangement.
Terms:
Price: £1,500.00
Collection or Delivery
Contact:
Mike Mortmer
Marlborough
SN8
UK
07770636583
email
Harrison universal millHarrison universal millHarrison universal millHarrison universal mill

For Sale: Meddings M10 High Speed bench drill pristine condition

Sat 12th Oct '19

Advert ID: 36385

Machines
See all ads from Tony English
Details:
Meddings M10 High Speed bench drilling machine
3,000-10,000 rpm range
rotating table
3 phase
Drill is in excellent condition for its age, and has rarely been used
Buyer to dis-connect from electric supply and remove.

Collection only from BH16 Postcode
Terms:
Price: £500.00
Collection Only
Contact:
Trader
Tony English
poole
bh16
UK
01202 624136
email
Meddings M10 High Speed bench drill pristine conditionMeddings M10 High Speed bench drill pristine conditionMeddings M10 High Speed bench drill pristine conditionMeddings M10 High Speed bench drill pristine condition
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...

For Sale: Workshop equipment

Sat 12th Oct '19

Advert ID: 36384

Tools
Details:
Pratt Burnerd 5 inch self centring four jaw chuck with reverse jaws and key. Good condition.£110
Myford taper turning attachment. £150
Vertex coolant pump with plug and switch. Bought new but never used. £120.
Power hacksaw. Cuts accurately. 23/8 inch capacity vice. £95.
Buyer to collect the hacksaw but the others could be sent by courier at cost. I can take all to the Midlands exhibition on Thursday, possibly Friday morning.
Terms:
Price: Multiple
Collection Only
Contact:
Robin Slatter
Norwich
NR12
UK
email
Workshop equipmentWorkshop equipmentWorkshop equipmentWorkshop equipment

For Sale: Axminster Hobby morticer

Sat 12th Oct '19

Advert ID: 36383

Tools
Details:
Bought for a project which didn't materialise, this machine has been used only half a dozen times, so is in very good condition. Comes with 1/4, 3/8 and 1/2 inch chisels.
Buyer to collect but I will be at the Midlands exhibition on Thusday and possibly Friday morning.
Terms:
Price: £200.00
Collection Only
Contact:
Robin Slatter
Norwich
NR12
UK
email
Axminster Hobby morticerAxminster Hobby morticer

For Sale: Driving trolley

Sat 12th Oct '19

Advert ID: 36382

Models
Details:
Trolley for 71/4 inch loco. Well made with padded seat, connecting links and eyes for safety chain. Brass tank has baffle and filters for both water feeds. Good coal space.
Buyer to collect, but I will be at Midlands exhibition on Thursday, and possibly Friday morning.
Terms:
Price: £160.00
Collection Only
Contact:
Robin Slatter
Norwich
NR12
UK
email
Driving trolleyDriving trolleyDriving trolley

For Sale: Myford super 7

Sat 12th Oct '19

Advert ID: 36381

Machines
Details:
Myford super 7 lathe.
Comes with - stand , deep drip tray , riser blocks ,Pratt Bernard true grip chuck , catch plates , spare chuck back plate , change gears , dewhurst switch .
The condition is used , it’s a working lathe.
Terms:
Price: £1,600.00
Collection Only
Contact:
Mike
Willenhall
Wv12
UK
email
Myford super 7Myford super 7Myford super 7Myford super 7

For Sale: Tools

Fri 11th Oct '19

Advert ID: 36379

Tools
Details:
1 to 9 " Micrometers. ( 1 to 2, 2 to 3, 3 to 4 inches) etc

Digital micrometer 6 to 12 inches

Calipers, dividers, rulers all various sizes

Stilsons (pipegrips) x 3

Taps & Dies various sizes

Marking off plates 18 x 12 ", 16" square, 24 x 18", 36 x 24 "

Verniers
6", 12", 24"

Depth gauge 12"

Height gauge 12"

Vernier angle gauge

Marking off kit, for squares and angles

Sad sale due to workshop closing, running nearly 70 years
Terms:
Price: £750.00
Collection Only
Contact:
Paula Butters Peers
Newcastle Under Lyme
ST4
UK
email

For Sale: Quick change tool post holder myford/mini lathe size

Fri 11th Oct '19

Advert ID: 36377

Tools
Details:
4 quick change toolpost holders myford/minilathe size Dixon type all excellent condition 3 sets in total have also got a tool set.
Will post if you pay fees
Can take to the midland model engineering show Sunday
Terms:
Price: £60.00
Collection, Delivery or Post
Contact:
Mike
Willenhall
Wv12
UK
email
Quick change tool post holder myford/mini lathe sizeQuick change tool post holder myford/mini lathe size
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

Wanted: Kemo amplifier

Thu 10th Oct '19

Advert ID: 36374

General
Details:
I am looking for one of the older Kemo amplifiers. namely a 12watt type but it must have 4 wires. All the new ones have 5 wires and its harder to configure in my system. If anyone has a usable one lying about, would be very grateful.
Contact:
Keith Bloor
Burton on trent
DE11
UK
01283214542
email

For Sale: Meddings Drilling Machine

Wed 9th Oct '19

Advert ID: 36373

Tools
Details:
Meddings Drilltru bench drilling machine. Although this machine is about 50 years old , it is in reality almost brand new. It was found, buried in the back of a store where it had been bought by a company for use in a Government contract that never materialised. Forgotten for decades it was covered in cobwebs and still wearing its packing grease with its Jacobs chuck still in the original box. It is half inch capacity but could be persuaded up to five eights with the fitting of another chuck. The socket is 2MT and the motor half horsepower single phase. Motor by Brooks. It has the “production” table fitted with two T slots. I assembled it and have used it very sparingly on an occasional basis so it is mechanically in new condition. The paint has suffered a bit from age and is a bit flat but undamaged. The price is £400 which is about the same as a Chinese import but it is a world away in quality. You will not be able to shake any casting sand out of this one! Sale includes a wooden bench which raises the machine to a comfortable working height for someone of average stature.
Machine located near Looe, Cornwall, easy access for collection. Truck or trailer can be put right outside workshop door.
Terms:
Price: £400.00
Collection Only
Contact:
Maurice Clark
Lanteglos by Fowey
PL23
UK
01726870498
email

For Sale: Crompton Parkinson motor

Wed 9th Oct '19

Advert ID: 36372

Machines
See all ads from Anthony Cook
Details:
A 2hp single phase capacitor start motor. It comes wired with an MEM safety cutout switch and 13amp plug. The motor is ideally suited to driving a wood planer or large circular saw.
Terms:
Price: £80.00
Collection Only
Contact:
Anthony Cook
Coulsdon
CR5
UK
020 86606521
email
Crompton Parkinson motorCrompton Parkinson motorCrompton Parkinson motor

Information: rjs milling machince

Wed 9th Oct '19

Advert ID: 36370

Machines
Details:
any Info please on this watch & clock milling machine, made in germany would there be a indexing tool for these thanks steve
Contact:
naylor
UK
01915264987
email
rjs milling machince

For Sale: engine crane, drilling machine, boring/facing head etc

Wed 9th Oct '19

Advert ID: 36368

Tools
Details:
The clearance continues:-

Machine Mart 1000kg folding engine crane. Not much used, but I'm unlikely to need it again now the really heavy stuff has gone. £100 collection only.
Laad levelling beam for the engine crane, never used. £25 collection only.

Draper 12 speed drilling machine with 16mm chuck. Single phase motor. I've owned this from new, and the table is virtually unmarked. Table tilts and rotates and has rack and pinion lifting.
£100 collection only

Boring and facing head on 3MT shank. Old but works. Robust.
£50 if collected or plus postage at cost.

Box of 7 Mercer dial gauges, all imperial but mostly in need of attention/repair.
£20 if collected, £25 if posted.
Terms:
Price: Multiple
Collection or Post
Contact:
Richard Wilson
Inkberrow
WR7
UK
07913 849846
email
engine crane, drilling machine, boring/facing head etcengine crane, drilling machine, boring/facing head etcengine crane, drilling machine, boring/facing head etcengine crane, drilling machine, boring/facing head etc

For Sale: Clock gear cutters

Wed 9th Oct '19

Advert ID: 36367

Tools
Details:
Clock (cycloidal) gear cutters in various DP sizes from 34 to 70 and teeth counts from 6 to rack. The cutters have either 1/4" or 3/8" bores and are unused although have been stored for some years.
Sizes available :-
DP34 T10,108.
DP40 T7,12,55.
DP42 T6,39,40,72.
DP44 T12,86.
DP45 T,6,7,8,9,10,35,90,135.
DP50 T7,21,26,48,56,68,72,75,80,90,96.
DP52 T6,10,39,60,64,72.
DP56 T56,60.
DP58 T7,8,80
DP66 T7,63
DP68 T70
DP70 T6,7,9

£25 each + postage
Terms:
Price: Free
Postage: Free
Collection or Post
Contact:
Clive
Bexhill
TN39
UK
01424 844427
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...

For Sale: Meddings Floor Standing Pillar Drill.

Tue 8th Oct '19

Advert ID: 36366

Machines
Details:
Meddings Floor Standing Pillar Drill.

High/Low.

Forward/Reverse.

80-4000 rpm's speed.

10 Speed.

Single Phase.

13mm.

240v.
Terms:
Price: £350.00
Collection Only
Contact:
Deborah Dimond
Wilmslow
SK9
UK
Dave Helsby 0161-437-9591

For Sale: Quorn Cutter and Grinder

Tue 8th Oct '19

Advert ID: 36365

Tools
Details:
For Sale
Quorn Cutter and Grinder as per photographs.

Sold in untested condition as sadly my late father in law passed away before I could ask.

More photos available.

Strictly collection only unless buyer wishes to arrange own courier due to weight (at least 15kg).

All pieces in image included as well as drawings.

Email or text message preferred as I work full time and am unable to answer my phone during the day. I'm not technically minded but will do my best to answer any questions.
Terms:
Price: £950.00
Collection Only
Contact:
Laura Parry
Exeter
EX9
UK
07883471248
email
Quorn Cutter and GrinderQuorn Cutter and GrinderQuorn Cutter and GrinderQuorn Cutter and Grinder

For Sale: Large Stuart Style Gas Engine

Tue 8th Oct '19

Advert ID: 36361

Models
Details:
For Sale
Large twin flywheel gas engine, thought to be Stuart Turner or similar style with wooden transportation chest. At least 50 years old but possibly older.

Thought to be in running condition but sadly not tested for a number of years due to illness. I am now selling following the death of my father in law.

Please see photos for full condition. Item is very heavy (approx 20-30 kgs) so would recommend collection but buyer can arrange their own courier.

More photos available on request.

Email or text message preferred as I work full time so cannot answer the phone during the day. I'm not very technically minded but will do my best to answer any questions.
Terms:
Price: £3,950.00
Collection Only
Contact:
Laura Parry
Exeter
EX9
UK
07883471248
email
Large Stuart Style Gas EngineLarge Stuart Style Gas EngineLarge Stuart Style Gas EngineLarge Stuart Style Gas Engine

For Sale: Kerry Lathe

Tue 8th Oct '19

Advert ID: 36360

Machines
Details:
Model AG 51/2" x 23".
Hardened bedway, removable gap (swings 17" dia)
LOO headstock spindle, takes 1" dia bar.
Cone clutch & braked spindle.
Motor 1.5HP 1425 rpm 230 Volt, reversible.
Drive. Twin 'A' section Vee belts.
5" Three Jaw Chuck.
61/2" Four jaw chuck.
9" faceplate.
Fixed & travelling steadies.
Dewhurst reversing switch.
On makers stand.
Original manual & spare parts list.

This is an Imperial lathe which can cut Metric threads if you can find 48,56 & 127 tooth change wheels (all 18 Dp) The Metric chart is attached to machine.
Terms:
Price: £650.00
Collection Only
Contact:
R Dacey
Peterborough
PE7
UK
01733 245317
Kerry LatheKerry LatheKerry Lathe

Wanted: Brass gears

Tue 8th Oct '19

Advert ID: 36358

General
See all ads from Richard Brake
Details:
Can anyone make me a couple of brass 32T gears?

A few years ago a gentleman on this forum from Lancashire made some backgears for my pillar drill. But I have lost his contact details.
Contact:
Richard Brake
West Sussex
RH20
UK
07976 721330
email
Brass gears

For Sale: Meddings mercury MkII drill

Tue 8th Oct '19

Advert ID: 36355

Tools
See all ads from Michael Whittingham
Details:
Meddings startrite Mercury Mk II bench mount pillar drill. 5 speed pulley with 240v single phase motor.
Great drill for the smaller shop.
Terms:
Price: £160.00
Collection Only
Contact:
Michael Whittingham
BARNSLEY
S73
UK
email
Meddings mercury MkII drill
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Motor

Mon 7th Oct '19

Advert ID: 36352

General
Details:
This is an ex Black & Decker band saw motor. Good condition although needs rewiring. It has a pulley for tooth band running,which could be substituted for ordinary belt pulley.
300W. 220/240V. 1.4A. 1500RPM

Would post but,prefer collection.
Terms:
Price: £22.50
Collection Only
Contact:
R.Jeffery
Hornchurch
RM11
UK
01708451564
email

For Sale: large tap wrench Lal No 104 805mm long for 3/4"-1 1/2" taps

Mon 7th Oct '19

Advert ID: 36351

Tools
See all ads from Tony English
Details:
Large Engineers tap wrench
LAL No-104
805mm long
for taps 3/4"-11/2"
uses taps with square tangs of 10mm up to 25mm
lightly used and in excellent condition
Terms:
Price: £34.00
Collection Only
Contact:
Trader
Tony English
poole
bh16
UK
01202 624136
email
large tap wrench Lal No 104 805mm long for 3/4"-1 1/2" tapslarge tap wrench Lal No 104 805mm long for 3/4"-1 1/2" taps

For Sale: Very large tap wrench England 1.3m long for 1"-2 1/4" taps

Mon 7th Oct '19

Advert ID: 36350

Tools
See all ads from Tony English
Details:
Very large Engineers tap wrench
England
1.3 metres long
for 1"-21/4" taps
uses taps with square tangs of 14.5mm up to 42mm
rarely used and in excellent condition
Terms:
Price: £50.00
Collection Only
Contact:
Trader
Tony English
poole
bh16
UK
01202 624136
email
Very large tap wrench England 1.3m long for 1"-2 1/4" tapsVery large tap wrench England 1.3m long for 1"-2 1/4" taps

For Sale: large tap wrench Lyndon A-A 1.08m long for tap squares of 16

Mon 7th Oct '19

Advert ID: 36349

Tools
See all ads from Tony English
Details:
Large Engineers tap wrench
Lyndon A-A (Dated 1940)
1.08 metres long
uses taps with square tangs of 16mm up to 32.5mm
rarely used and in excellent condition
Terms:
Price: £40.00
Collection Only
Contact:
Trader
Tony English
poole
bh16
UK
01202 624136
email
large tap wrench Lyndon A-A 1.08m long for tap squares of 16large tap wrench Lyndon A-A 1.08m long for tap squares of 16

For Sale: Large flat bed Machine vice 6" jaws jaw capacity 9 1/2"

Mon 7th Oct '19

Advert ID: 36348

Tools
See all ads from Tony English
Details:
Large flat bed milling vice
Base is 161/2" long x 101/2" wide x 31/2" to top of jaws
6" serrated jaws,
Jaw capacity 91/2" approx
4 clamping slots 5/8" wide
grey crackle finish
rarely used and in excellent condition
Terms:
Price: £75.00
Collection Only
Contact:
Trader
Tony English
poole
bh16
UK
01202 624136
email
Large flat bed Machine vice 6" jaws jaw capacity 9 1/2"Large flat bed Machine vice 6" jaws jaw capacity 9 1/2"Large flat bed Machine vice 6" jaws jaw capacity 9 1/2"Large flat bed Machine vice 6" jaws jaw capacity 9 1/2"

For Sale: Box of Plastic billets offcuts 68mm diameter red black

Mon 7th Oct '19

Advert ID: 36347

Materials
See all ads from Tony English
Details:
Quantity of Plastic billets/offcuts
approx. 68mm diameters
Red and Black as per pic
Tote box not included.
Terms:
Price: £20.00
Collection Only
Contact:
Trader
Tony English
poole
bh16
UK
01202 624136
email
Box of Plastic billets offcuts 68mm diameter red black


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...

For Sale: Architectural drawing storage wooden cabinet plans Blueprint

Mon 7th Oct '19

Advert ID: 36346

Tools
See all ads from Tony English
Details:
Large Wooden cabinet for Plans/Drawings/Blueprints etc
461/2" wide x 321/2" deep x 35" tall
x7 smooth running drawers 3" deep with label tabs
No top or hardboard to 1 side (see pics) Contents in drawer in pics not included
Still a very useful cabinet for someone
Rather not throw this away.
Terms:
Price: £40.00
Collection Only
Contact:
Trader
Tony English
poole
bh16
UK
01202 624136
email
Architectural drawing storage wooden cabinet plans BlueprintArchitectural drawing storage wooden cabinet plans BlueprintArchitectural drawing storage wooden cabinet plans BlueprintArchitectural drawing storage wooden cabinet plans Blueprint

For Sale: Curchill OSB Horizontal surface grinder

Sun 6th Oct '19

Advert ID: 36344

Machines
Details:
I have for sale an absolute Rolls Royce of surface grinders! It is a Churchill OSB surface grinder.Perhaps a little large for your average model engineer, but well worth it if you have the space. This grinder was in regular use up to about 2 years ago, it has since been dry stored & run occasionally to keep things free & lubricated. I can demonstrate the machine under power,from a 240v phase converter but it really needs proper 3 phase 415v for full power. The grinder comes with 8 spare wheels of different sizes & grades, some brand new & some used. (these are worth over £1k on their own)

It has a fully automatic magnetic table which can accomodate a work piece of up to 32" long, 10" wide & 16" tall.
I have a full instruction manual on CD & an email from Churchill grinders confirming machine serial No.& when/where it was originally sold.

This machine is LARGE & weighs around 8 tons, so you will need a lorry with large Hiab to collect it. I can help with loading at my end but that is all.
Terms:
Price: £5,000.00
Collection Only
Contact:
Clayton Smith
Sleaford
NG34
UK
email
Curchill OSB Horizontal surface grinderCurchill OSB Horizontal surface grinderCurchill OSB Horizontal surface grinderCurchill OSB Horizontal surface grinder

For Sale: Power Hacksaw Benchmaster

Sun 6th Oct '19

Advert ID: 36343

Machines
Details:
Three phase motor so I haven't been able to test it, nice size for home workshop mole grips in one of the photos for scale, belt guard missing
this would make a nice winter project.
Terms:
Price: £110.00
Collection Only
Contact:
Paul Duffy
Chester
CH62
UK
email
Power Hacksaw BenchmasterPower Hacksaw BenchmasterPower Hacksaw BenchmasterPower Hacksaw Benchmaster

For Sale: Southbend Lathe

Sun 6th Oct '19

Advert ID: 36342

Machines
Details:
A nice old lathe it has not been used for a number of years so could do with a clean and the electrics rewired, I have not tried the lathe as I bought a bigger one and have no further use for it.
I have removed the back gear covers to check the gear teeth and are all ok.
the Duhurst switch and two of the original spanners also come with the lathe.
Terms:
Price: £300.00
Collection Only
Contact:
Paul Duffy
Chester
CH62
UK
email
Southbend LatheSouthbend LatheSouthbend LatheSouthbend Lathe

For Sale: Warco GH Universal Mill

Sun 6th Oct '19

Advert ID: 36341

Machines
See all ads from Ian McVickers
Details:
Warco GH Universal milling machine and base cabinet on anti-vibration mounts for sale. This has recently had all of the headstock bearings changed and an oil change. Long travel power feed and a 3 axis dro is fitted. I have also fitted a power raise/lower with variable speed driven by a stepper motor through a reduction worm gearbox, far easier than winding the head up and down by hand. The machine is in very good condition. An extended drip tray is included as is some tooling, R8 metric collet set, drill chuck, slitting saw arbour and an ER collet holder.
Pick up is preferred to assist with removal but it could be shipped at buyers cost.
Terms:
Price: £2,100.00
Collection or Post
Contact:
Ian McVickers
Denny
FK66
UK
07815081115
email
Warco GH Universal MillWarco GH Universal MillWarco GH Universal MillWarco GH Universal Mill

For Sale: Archdale Vertical Milling Machine

Fri 4th Oct '19

Advert ID: 36336

Machines
Details:
Vintage Archdale Vertical Milling Machine

Speeds 79 to 2000 RPM

In good working order, been in our workshop for many years. only selling as workshop closing.

Well looked after

made during or just after the second world war

collection only
collection and transport to be arranged by purchaser
VAT to be added
sold as seen
Terms:
Price: £1,000.00
Collection Only
Contact:
Paula Butters Peers
Newcastle Under Lyme
ST5
UK
email
Archdale Vertical Milling MachineArchdale Vertical Milling MachineArchdale Vertical Milling Machine
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...

For Sale: Mellor Turret Lathe

Fri 4th Oct '19

Advert ID: 36335

Machines
Details:
Good working order, been in our workshop for many years. Only selling as workshop closing.

6 position tool post. 7" swing over bed. additional cross slide. 13/16" spindle bore. speed 35 to 700 RPM 4 " 3 jaw chuck.

VAT to be added
Collection only
Collection and transport to be arranged by purchaser
sold as seen

amount or o.v.n.o
Terms:
Price: £800.00
Collection Only
Contact:
Paula Butters Peers
Newcastle Under Lyme
ST5
UK
email
Mellor Turret LatheMellor Turret Lathe

Information: DIN 2080/ISO 40 Drilling Chuck Options

Thu 3rd Oct '19

Advert ID: 36333

Machines
See all ads from Brian Tulley
Details:
Hi,
I'm looking into options for purchasing a drilling chuck (or perhaps an adapter to use a Morse Taper Chuck?) with a Milling Machine which has a DIN 2080/ISO 40 Spindle Taper. As it's not my machine (it's at a College Model Engineering Workshop) and the College budget for purchasing tooling is very limited then I'm seeking ideas for good solutions without spending the earth. All ideas much appreciated - many thanks.
Brian
Contact:
Brian Tulley
UK
email

For Sale: Collet chuck

Thu 3rd Oct '19

Advert ID: 36331

Tools
Details:
D1-6 mounted lever operated collet chuck fits colchester 7.5".
Complete with 12 multisize crawford collets.
Sizes 1/8". To 15/8."
,,,,,,, 3.17 to. 41.3 mm. In good condition, boxed.

£300.00 ono post plus or pick up or meet up..

phone 01255 433583 leave a message and i will get back to you,, gerry
Terms:
Price: £300.00
Collection, Delivery or Post
Contact:
gerry
clacton
co15
UK
0125533583

For Sale: Warco Hydraulic Power Saw + Phase Converter

Thu 3rd Oct '19

Advert ID: 36330

Tools
Details:
Warco Hydraulic Power Hacksaw
Brand New !! ( Never Been Used )
Variable Speed Rate , Adjustable Material Length Stop
Cutting Capacity Round 200mm
Cutting Capacity Square 190mm x 190mm
Stroke Distance 120mm ,
Blade Size 320mm x 32mm x 1.6mm
Dimensions ( L x W x H )
1240mm x 730mm x 1010mm
3 Phase ( 440 Volt Motor )
Warco Price - £4185.72
More Picture at : www.bedetools.com

The saw comes with a :
Silverdrive Phase Converter
Up to 5.5kw
240 Volt in
415 Volt out
Also fitted with Vary speed Control and Reverse

Can be Secured to a Pallet for delivery to your door by tail lift wagon at Cost
Terms:
Price: £1,700.00
Collection or Delivery
Contact:
Trader
Bede Tools and Machinery
Jarrow
UK
0191 4286575 - 07966285390
email
Warco Hydraulic Power Saw + Phase ConverterWarco Hydraulic Power Saw + Phase ConverterWarco Hydraulic Power Saw + Phase ConverterWarco Hydraulic Power Saw + Phase Converter

For Sale: Silverdrive 3phase invertor 240 to 415v

Thu 3rd Oct '19

Advert ID: 36329

Machines
See all ads from Anthony Cook
Details:
Included in the price are two 415v, 3phase 1.5HP motors. Can be seen running.
Terms:
Price: £80.00
Collection Only
Contact:
Anthony Cook
Coulsdon
CR5
UK
020 86606521
email

For Sale: RJH 'ferret' lathe tool grinder

Wed 2nd Oct '19

Advert ID: 36327

Machines
Details:
A'ferret' grinder in good condition;the motor is 3 phase,230/415v,so will work well from an inverter;complete with two hubs,one fitted with an emery disc for precision facing of small items,the other hub has a diamond wheel suitable for the brazed carbide type lathe tools.A drummond lever forward/off/reverse switch is fitted.£175.00
Its a bit heavy for postage,but could be sent on a pallet at buyers cost.
Terms:
Price: £175.00
Collection Only
Contact:
Alan
Kendal
LA8
UK
email
RJH 'ferret' lathe tool grinderRJH 'ferret' lathe tool grinder
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: Raglan 5" large vertical milling slide

Wed 2nd Oct '19

Advert ID: 36326

Machines
Details:
Rarely seen available for sale;a large,double swivel Raglan milling slide,having a built in vice,and showing little sign of usage. It could easily be adapted for use with a variety of medium size lathes.Condition is good. £195 can be posted at extra cost.
Terms:
Price: £195.00
Collection Only
Contact:
Alan
Kendal
LA8
UK
email
Raglan 5" large vertical milling slideRaglan 5" large vertical milling slide

For Sale: 0.55 Kw 3 phase motor,220/415v,for myford s7

Wed 2nd Oct '19

Advert ID: 36325

Machines
Details:
this british made motor will fit a myford s7 lathe.I had it opened up,checked over by a motor specialist;it was found to be in excellent condition,was fitted with new bearings,tested and bench tested,now running sweetly.It was intended to run from an inverter(not supplied) on my own lathe.£70, can be posted at extra cost.
Terms:
Price: £70.00
Collection Only
Contact:
Alan
Kendal
la8
UK
email
0.55 Kw 3 phase motor,220/415v,for myford s70.55 Kw 3 phase motor,220/415v,for myford s7

For Sale: Collet chuck.

Wed 2nd Oct '19

Advert ID: 36323

Tools
Details:
collet chuck D-6 fits colchester, 71/2".comes with 12.off boxed multisze collets.
Sizze range.
1/8" to 15/8", ( 3.17 to. 41.3 mm)

£300.00 ono.
post extra or pick up, or meet up.

phone 01255 433583 leave a message and i will get back to you,, gerry.
Terms:
Price: £300.00
Collection, Delivery or Post
Contact:
Gerry
clacton
co15
UK
01255 433583
Collet chuck.Collet chuck.

Wanted: Toyo, Manix, Record milling collets

Wed 2nd Oct '19

Advert ID: 36321

Machines
See all ads from Ian Guzzi
Details:
Has any one got some collets for the Toyo milling attachments or drill chuck please?
In fact any Toyo accessories could be of interest to me.

I believe the names Record, Manix and Sakai are all the same machine.

Thank you.
Contact:
Ian Guzzi
Bideford
EX39
UK
email
Toyo, Manix, Record milling colletsToyo, Manix, Record milling collets

For Sale: 8" double ended polishing machine

Wed 2nd Oct '19

Advert ID: 36320

Machines
Details:
an 8" capacity polishing machine with the correct left and right hand taper mop spindles,that started life as a clarke industrial grade grinder;it looks unused,but has been tested and runs nicely.Single phase.£60 I can post at extra cost,or,if pre-paid,could deliver free to midland ME exhibition.
Terms:
Price: £60.00
Collection Only
Contact:
Alan
Kendal
LA8
UK
email
8" double ended polishing machine8" double ended polishing machine

For Sale: 2" part built traction engine (reduced)

Wed 2nd Oct '19

Advert ID: 36318

Models
Details:
A part built traction engine in 2" scale.Work to date is quite good, a double cylinder engine with a complete boiler with (expired) certificate, but boiler unused, Advertised before, but no takers, so a (substantial) price reduction. Over £1300 spent on this so far.Only one rear wheel present but other parts and lots of gears.
Terms:
Price: £900.00
Postage: £30.00
Collection, Delivery or Post
Contact:
David Bothwell
HALIFAX
HX1
UK
email
2" part built traction engine (reduced)2" part built traction engine (reduced)2" part built traction engine (reduced)
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...

For Sale: Chinese Hit and Miss Engine

Wed 2nd Oct '19

Advert ID: 36317

Models
Details:
Chinese Hit and Miss Engine

Boxed, brand new and unused.

Here's a link to one running on YouTube:
http://www.youtube.com/watch?v=rMBthroYU9U
Terms:
Price: £150.00
Postage: £20.00
Collection, Delivery or Post
Contact:
Mark
Bookham
KT23
UK
email
Chinese Hit and Miss EngineChinese Hit and Miss EngineChinese Hit and Miss EngineChinese Hit and Miss Engine

For Sale: Chinese Hit and MIss Engine

Wed 2nd Oct '19

Advert ID: 36316

Models
Details:
Chinese Hit and Miss Engine

Boxed, brand new and unused.

Here's a link to one running on YouTube: http://www.youtube.com/watch?v=WaHzO-tKSKw
Terms:
Price: £175.00
Postage: £20.00
Collection, Delivery or Post
Contact:
Mark
Bookham
KT23
UK
email
Chinese Hit and MIss EngineChinese Hit and MIss EngineChinese Hit and MIss EngineChinese Hit and MIss Engine

For Sale: boxhill

Tue 1st Oct '19

Advert ID: 36313

Materials
Details:
boxhill castings as new
Terms:
Price: £20.00
Collection Only
Contact:
dave richardson
spondon
de217ey
UK
david.richardson240@ntlworld.com
email
boxhillboxhillboxhill

For Sale: workshop tools

Tue 1st Oct '19

Advert ID: 36312

Tools
Details:
draper 4to5 outside micrometer as new kennedy metric slip gauges as new willing to post 10 .00 for micrometer 50.00 for slip gauges
Terms:
Price: £10.00
Collection Only
Contact:
dave richardson
spondon
de217ey
UK
david.richardson240@ntlworld.com
email
workshop toolsworkshop toolsworkshop toolsworkshop tools

Wanted: D1-6 Camlock backplate

Tue 1st Oct '19

Advert ID: 36311

Tools
See all ads from Jack Russell
Details:
Looking for D1-6 camlock back plate.
With or without cam/pins.

Ideally has no hole in the centre of backplate, as I want to fit a smaller diameter chuck and a hole will interfere with where I need to fix the chuck.

Thanks
Contact:
Jack Russell
Preston
PR3
UK
email

Wanted: quartering jig

Tue 1st Oct '19

Advert ID: 36310

Models
Details:
looking for a 5 inch Duchess Quartering jig details please
Contact:
dave richardson
spondon
de217ey
UK
david.richardson240@ntlworld.com
email


Disclaimer

Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.

By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.

We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.

In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.

We do not sell, hire, share or give out your email address.

The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.

So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new  and repeat visitors. It does not have any detail on who you are.

Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.

All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.

This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales. 

 

Donate

Want to help us fund the site and time spent by the people behind it then use the button below.

We are not a registered charity so you can't claim it back but it helps pay for the costs of running the site and improving the features.

You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.